My New Band Saw!

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Shane posted 06-13-2013 04:42 PM 980 views 0 times favorited 9 replies Add to Favorites Watch
View Shane's profile


294 posts in 1809 days

06-13-2013 04:42 PM

Found this on Craigslist this week for $100. It was still in the original box which had never been opened. It’s a Craftsman 21400. It’s not top of the line but has gotten really good reviews everywhere I’ve looked and will serve my purposes just fine.

9 replies so far

View a1Jim's profile


117091 posts in 3575 days

#1 posted 06-13-2013 04:49 PM

enjoy !

-- wood crafting & woodworking classes

View crank49's profile


4030 posts in 2969 days

#2 posted 06-13-2013 05:15 PM

I have the Rikon 10” that is the same saw in green paint.
Wouldn’t want to be without it. Great little saw.
Get you some good blades for it.

View Shane's profile


294 posts in 1809 days

#3 posted 06-13-2013 05:31 PM

What do you recommend crank?

View HorizontalMike's profile


7757 posts in 2912 days

#4 posted 06-13-2013 06:39 PM

Boy! I could use one of these guys. That way I could leave the resaw blade on my 14” and have a dedicated 1/4in blade BS. Enjoy!

-- HorizontalMike -- "Woodpeckers understand..."

View Surfside's profile


3389 posts in 2171 days

#5 posted 06-13-2013 08:41 PM

Congratulations. How’s the installation and tuning of it ?

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View crank49's profile


4030 posts in 2969 days

#6 posted 06-13-2013 10:16 PM

I have been happy with my blades from Highland Woodworking.
I got a 1/2” Wood Slicer II for re-sawing, a 1/4” 6 tpi general purpose and a 1/8” 14 tpi for tight curves in thin stock.

There are better blades for the general purpose work but not normally available in 70-1/2” length required by this saw.

View RibsBrisket4me's profile


1554 posts in 2503 days

#7 posted 06-13-2013 11:41 PM

Great score!!!

View Buckethead's profile


3194 posts in 1866 days

#8 posted 06-13-2013 11:45 PM

Nice! You are moving and shaking, Burgels!

-- Support woodworking hand models. Buy me a sawstop.

View toolie's profile


2121 posts in 2626 days

#9 posted 06-14-2013 12:31 AM

+1 on crank’s blade suggestions. just stay away from timberwolfs. they are developing a reputation for having misaligned blade welds. at least the 4 new blades i git from suffolk woodworking all had misaligned blade welds. i look to iturra design for my blades. they transformed a formerly owned POS 18” jet BS into an adequate, but still below average, performer.

-- there's a solution to every just have to be willing to find it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics