LumberJocks

Very cool...

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by DKV posted 05-30-2013 10:46 PM 1277 views 0 times favorited 10 replies Add to Favorites Watch
View DKV's profile

DKV

3940 posts in 1970 days


05-30-2013 10:46 PM

I have always liked the stacked plywood exposed edge look. What do you think, am I crazy? Should there be more voids showing?

-- This is a Troll Free zone.


10 replies so far

View DKV's profile

DKV

3940 posts in 1970 days


#1 posted 05-30-2013 11:05 PM

This one took some very special talent.

-- This is a Troll Free zone.

View DS's profile

DS

2151 posts in 1886 days


#2 posted 05-30-2013 11:14 PM

I kinda see it as the modern version of the cinder block book case.

-- "Hard work is not defined by the difficulty of the task as much as a person's desire to perform it.", DS251

View Buckethead's profile

Buckethead

3140 posts in 1334 days


#3 posted 05-31-2013 01:19 AM

I think the first project needed to add a layer at the upper and/or lower level for support. It seems to be sagging.

I do like it conceptually.

-- Support woodworking hand models. Buy me a sawstop.

View Rick  Dennington's profile

Rick Dennington

5181 posts in 2660 days


#4 posted 05-31-2013 02:00 AM

No…... I don’t think so…...

-- At my age, an "all--nighter" is not having to get up and pee...!!!

View redryder's profile

redryder

2394 posts in 2568 days


#5 posted 05-31-2013 05:06 AM

I have been working on some different picture frames lately and I took a sheet of baltic birch 1/2”, ripped it in strips, laminated it together to try a photo frame with Purple Heart to see what it would look like. I agree with you that less voids can be better and make for a unique project.

-- mike...............

View DKV's profile

DKV

3940 posts in 1970 days


#6 posted 05-31-2013 05:08 AM

Redryder, very nice.

-- This is a Troll Free zone.

View Bernie's profile

Bernie

416 posts in 2303 days


#7 posted 06-01-2013 01:56 AM

WOW – I finally got that stick out of my eyes and look at what I now see. That is awesome, cool and very nice. Thanks for the post

-- Bernie: It never gets hot or cold in New Hampshire, just seasonal!

View tool_junkie's profile

tool_junkie

296 posts in 1995 days


#8 posted 06-01-2013 05:29 PM

I like the exposed plywood edge look as well, but its gotta be done right and in the correct proportions.

The media console project you posted seems a little out of proportion on the top and the bottom as Buckethead pointed out. I think a thicker top and bottom would look much better. Also, the stacks that make the vertical divider would look better if they were flush with each other. Just my personal opinion.

View DKV's profile

DKV

3940 posts in 1970 days


#9 posted 09-25-2013 04:04 AM

Bump test

-- This is a Troll Free zone.

View Randy_ATX's profile

Randy_ATX

835 posts in 1908 days


#10 posted 09-25-2013 05:01 PM

Here is a prototype of a piece I created about a year ago that I have had sitting on my office desk. Many people comment about it. It is from laminated construction beams which were about 2 inches wide to start with. I cut them up and glued side by side and slapped on some 2 part epoxy. I want to make a frame with this system first and then possibly a coffee or end table.

-- Randy -- Austin, TX by way of Northwest (Woodville), OH

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com