What is going on in your shop weekend of May 4th

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by GT350 posted 05-05-2013 12:40 AM 1281 views 1 time favorited 26 replies Add to Favorites Watch
View GT350's profile


368 posts in 2004 days

05-05-2013 12:40 AM

Another forum I belong to has this going most weekends so I thought I would try and start it here. I have been working on this cherry cabinet for awhile. This weekend I think I will be just about done with the woodwork, I need to add another hinge to the left door and finish fitting the doors. The weather here in Southern Oregon is so nice though that it is hard to spend time in the shop.

26 replies so far

View GT350's profile


368 posts in 2004 days

#1 posted 05-05-2013 12:42 AM

Just curious, when inserting a photo with an ipad on this forum how do I rotate the picture?

View Buckethead's profile


3194 posts in 1891 days

#2 posted 05-05-2013 12:48 AM

I had the very same problem which went away on its own. Not that this is helpful.

But your cabinet is beautiful.

-- Support woodworking hand models. Buy me a sawstop.

View a1Jim's profile


117115 posts in 3600 days

#3 posted 05-05-2013 01:00 AM

Nice looking cabinet, looks better upright. :))

-- wood crafting & woodworking classes

View GT350's profile


368 posts in 2004 days

#4 posted 05-05-2013 01:02 AM

It does look better upright, now, how did you do it?

View a1Jim's profile


117115 posts in 3600 days

#5 posted 05-05-2013 01:04 AM

I used my photo program to rotate it. I wouldn’t have a clue how to use a smart phone :))

-- wood crafting & woodworking classes

View trippcasey's profile


72 posts in 1947 days

#6 posted 05-05-2013 01:07 AM

This is what I plan on finishing if I get time. That is if the wife doesn’t pop first. Our sons due date is tomorrow, so Im on edge to get involved in something with expecting him to be here any minute. Lord knows when Ill get another chance to get back in here when he comes.

I need to finish the footboard (bookmatched piece to the headboard) and build the rails, make sure they all fit good, then add linseed oil, let it cure, then satin wipe on poly x3 or 4. Maybe this weekend is a little ambitious.

The next pics you see from me could be a finished live edge poplar bed, or my two little girls holding their baby brother. Either way, it will be a beautiful site, and Im looking forward to both!

-- I almost post pics....until I see the daily top three...then I delete my post.

View GT350's profile


368 posts in 2004 days

#7 posted 05-05-2013 01:09 AM

Let’s see if this works. I guess not.

View NewEnglandsWoodWorks's profile


117 posts in 2624 days

#8 posted 05-05-2013 01:13 AM

I plan on just cleaning the shop and some regular tool maintenance after a few big projects.

-- Brett

View whitebeast88's profile


4128 posts in 2213 days

#9 posted 05-05-2013 01:13 AM

i don’t have a pic,but i’m working on a miter saw one side done working on the second side.

-- Marty.Athens,AL

View Manitario's profile


2630 posts in 2906 days

#10 posted 05-05-2013 01:21 AM

I’m in Vegas for a conference, so a long way away from my shop. As spring starts I find myself spending less and less time in the shop, there are just too many outdoor projects to do now that the snow is melted.

-- Sometimes the creative process requires foul language. -- Charles Neil

View 47phord's profile


182 posts in 2260 days

#11 posted 05-05-2013 01:23 AM

Well, I was going to get the materials to start on a new workbench but my work truck needed a surprise $300 repair today so…guess not <cue>

View GlennsGrandson's profile


442 posts in 2332 days

#12 posted 05-05-2013 01:29 AM

Working 12 hours shifts this weekend so the minimal extra time is spent with the wife! I am also taking a pretty rough Medical Biochemistry class online that is definitely taking up all of my wood time.. Ask me again in a month!

-- Grant - N Dakota

View chrisstef's profile


17423 posts in 3029 days

#13 posted 05-05-2013 01:44 AM

I squared up and planed to size some doug fir timbers for a new bench.

-- Its not a crack, its a casting imperfection.

View JustJoe's profile


1554 posts in 2061 days

#14 posted 05-05-2013 01:44 AM

Every day is a weekend when you’re retired, but today was spent moving some tools around to try and make room for another purchase, hooking two of the last three machines to the DC system, grinding some metal lathe bits so I can finish a project I started months ago, and cannibalizing parts off my bench-dog router table to make a different router table. The last thing I did before heading in to watch TV was to find a piece of scrap just the right size to replace the mallet handle I broke in January. That’ll be a simple 5-minute lathe job that I should finish sometime in August.

trippcasey – congrats on the kid, hope he shows up on time and healthy.

-- This Ad Space For Sale! Your Ad Here! Reach a targeted audience! Affordable Rates, easy financing! Contact an ad represenative today at JustJoe's Advertising Consortium.

View Monte Pittman's profile

Monte Pittman

29383 posts in 2361 days

#15 posted 05-05-2013 02:01 AM

I don’t know how to make it do what you want it to do, I just know how to fix the pictures so they won’t rotate. Edit photo, choose “crop”. Select entire picture and save. It will load straight then.

-- Nature created it, I just assemble it.

showing 1 through 15 of 26 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics