LumberJocks

Delta 22-540 planer problem

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Andrew Betschman posted 464 days ago 427 views 0 times favorited 2 replies Add to Favorites Watch
View Andrew Betschman's profile

Andrew Betschman

284 posts in 1829 days


464 days ago

my planer is out by .020’ side to side. On the left i got a reading of .947” on the right is at .927” What adjustment can i make to get is back? The blades are sharpen straight, and set in the cutter head parallel.

-- Andrew, Ohio http://andrewmbetschman.com/


2 replies so far

View Fred Hargis's profile

Fred Hargis

1656 posts in 1099 days


#1 posted 464 days ago

I sold mine over 10 years ago, so I’m going on memory. I don’t believe there is an easy way to adjust the cutterhead, if you’re absolutely sure that’s what’s off. You may have to adjust one of the 2 screws the assembly rides on, and I’d bet that getting it turned to adjust by .02” is going to be tough. It would amount to turning one screw enough to correct, then repositioning the drive belt (or chain, can’t remember) cog and getting it back in sync.

-- I long for the days when Coke was a cola, and a joint was a bad place to be (Merle Haggard)

View Moron's profile

Moron

4666 posts in 2499 days


#2 posted 464 days ago

whoa

nothing a little sanding cant fix

: )

-- "Good artists borrow, great artists steal”…..Picasso

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase