LumberJocks

deleted

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by NiteWalker posted 04-02-2013 02:05 PM 1322 views 0 times favorited 6 replies Add to Favorites Watch
View NiteWalker's profile

NiteWalker

2710 posts in 1231 days


04-02-2013 02:05 PM

deleted

-- He who dies with the most tools... dies with the emptiest wallet.


6 replies so far

View NiteWalker's profile

NiteWalker

2710 posts in 1231 days


#1 posted 04-04-2013 08:58 PM

Bump for sold items and a couple of new ones.
2. Tool Force HVLP Detail Gun
Brand new.
Price: $16 shipped

3. Rockler Shelf Pin Jig with 1/4” Bit
Only used on two projects.
Price: NOW $22 shipped.

5. Disston 26” 7tpi saw
I found this in the garage and don’t know much about it other than it needs some tlc. The blade is still very sharp.
Price: $38 shipped. If the price is out of line, let me know; I don’t mess with hand saws too much.

9. Woodcraft HVLP Bundle
This is woodcraft’s full size HVLP. Here’s what’s included:
- The gun with 20 oz nylon cup and 1.4mm needle set. The gun could use a bit of a cleaning, but everything still functions properly.
- An extra 1.4mm needle set
- 1.7mm needle set
- 2.0mm needle set
- 3 additional 20 oz nylon cups
- 2 Wrenches, 2 filters, cleaning brush, socket
Price: NOW $60 shipped.

10. Leecraft DL-1U Zero Clearance Insert
Fits delta, craftsman and other saws that use a 3 3/4” x 13 3/8” x 9/16” opening. Brand new.

Price: $18 shipped

11. Fuji XPC Bottom Feed HVLP Turbine Gun with Extras
As I suspected, I prefer the apollo 7500 more, so I’m selling the fuji gun.
This one is brand new and has a bunch of extras included.
Here’s what you get:
- The XPC gun with quart bottom feed aluminum cup
- Manual, wrench, cleaning brush and viscosity cup
- 1.4mm needle/nozzle/air cap set
- 1.0mm needle/nozzle/air cap set
- An extra aluminum quart cup
- Cup parts kit with 3 each of lid gaskets, lid diaphragms and check tube assemblies
- Set of 3 plastic lids for the bottom feed cup (not pictured, but these are them
All of this would cost $410.75 shipped from fuji or phelps.



My Price: $360 Shipped

Thanks for looking. If I find anything else as I clean the shop I’ll post it up.

-- He who dies with the most tools... dies with the emptiest wallet.

View NiteWalker's profile

NiteWalker

2710 posts in 1231 days


#2 posted 04-06-2013 04:43 AM

Bump for lower prices:
2. Tool Force HVLP Detail Gun
Brand new.

Price: $16 shipped

3. Rockler Shelf Pin Jig with 1/4” Bit
Only used on two projects.

Price: NOW $22 shipped.

5. Disston 26” 7tpi saw
I found this in the garage and don’t know much about it other than it needs some tlc. The blade is still very sharp.

Price: $38 shipped. If the price is out of line, let me know; I don’t mess with hand saws too much.

9. Woodcraft HVLP Bundle
This is woodcraft’s full size HVLP. Here’s what’s included:
- The gun with 20 oz nylon cup and 1.4mm needle set. The gun could use a bit of a cleaning, but everything still functions properly.
- An extra 1.4mm needle set
- 1.7mm needle set
- 2.0mm needle set
- 3 additional 20 oz nylon cups
- 2 Wrenches, 2 filters, cleaning brush, socket

Price: NOW $50 shipped.

10. Leecraft DL-1U Zero Clearance Insert
Fits delta, craftsman and other saws that use a 3 3/4” x 13 3/8” x 9/16” opening. Brand new.

Price: NOW $16 shipped

11. Fuji XPC Bottom Feed HVLP Turbine Gun with Extras
As I suspected, I prefer the apollo 7500 more, so I’m selling the fuji gun.
This one is brand new and has a bunch of extras included.
Here’s what you get:
- The XPC gun with quart bottom feed aluminum cup
- Manual, wrench, cleaning brush and viscosity cup
- 1.4mm needle/nozzle/air cap set
- 1.0mm needle/nozzle/air cap set
- An extra aluminum quart cup
- Cup parts kit with 3 each of lid gaskets, lid diaphragms and check tube assemblies
- Set of 3 plastic lids for the bottom feed cup (not pictured, but these are them
All of this would cost $410.75 shipped from fuji or phelps.

My Price: NOW $300 Shipped

-- He who dies with the most tools... dies with the emptiest wallet.

View TerryBaldridge's profile

TerryBaldridge

5 posts in 462 days


#3 posted 06-13-2013 08:16 PM

Do you still have the shelf jig?

terry

View NiteWalker's profile

NiteWalker

2710 posts in 1231 days


#4 posted 06-13-2013 08:17 PM

Hi Terry,
Yep, still have the shelf pin jig available.

-- He who dies with the most tools... dies with the emptiest wallet.

View TerryBaldridge's profile

TerryBaldridge

5 posts in 462 days


#5 posted 06-13-2013 08:34 PM

I might well need to to be drilling some pin holes soon.

If you would, send me an email. terry baldridge at gmail dot com. It will not let me send you a PM until I have a few more posts.

terry

View NiteWalker's profile

NiteWalker

2710 posts in 1231 days


#6 posted 06-13-2013 08:35 PM

No prob. Email on the way. :-)

-- He who dies with the most tools... dies with the emptiest wallet.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase