LumberJocks

FOG IN THE SHOP

« back to Safety in the Woodworking Shop forum

Forum topic by Grumpy posted 62 days ago 282 views 0 times favorited 28 replies Add to Favorites
View Grumpy's profile

Grumpy

6716 posts in 388 days


62 days ago

Topic tags/keywords: safety glasses fog on glasses fogged up safety glasses question

Now the Sun is coming back down under so will the humidity with the heat.
One of the safety issues in the workshop is that nusiance fog that appears on the inside of the safety glasses.
Does anyone out there have any ideas on a safe chemical to use on the inside of the glasses.
I know divers spit on their goggles which works in water but not so well in the shop.
Back Pain

-- Grumpy - "Always look on the bright side of life"- Monty Python

View DAN's profile

DAN

3496 posts in 519 days


62 days ago

try this link >grin< ... I ding-dong double-dog dare ya !

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View fredf's profile

fredf

228 posts in 246 days


62 days ago

I’d bet that rain-x would work if you have that down under—tho am pretty sure it contains silicone so you would want to be careful not to spread it around the shop . . . an eyeglass place would have an anti fog compound too. might well contain silicone too, tho

-- Fred, Springfield, Ma

View BeechPilotBarry's profile

BeechPilotBarry

410 posts in 239 days


62 days ago

I’ve used lots of products, as this is a big problem when mountain biking. Think fogged glasses are a nuisance in the shop? Try hitting a wet log or rock in the trail, while riding a bicycle at night. <g>

In the long run, CLEAN glasses stay unfogged longer for me, as well as adjusting them so there is some airflow around the lenses. I’ve even drilled 1/16” holes along the bottom, above my cheek, for more airflow. Maybe some extra airflow in the shop may also help.

-- - Real men read directions

View Grumpy's profile

Grumpy

6716 posts in 388 days


62 days ago

Thanks Dan. I missed that link should have done a search.
Fred I have some rain-x but not sure what it would do to my eyes.
Good tip there Barry. Some extra holes might work..

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Grumpy's profile

Grumpy

6716 posts in 388 days


62 days ago

I saw a face shield at the mower shop recently. It had a see through gauze mask. Might be worth a try.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View bbqking's profile

bbqking

277 posts in 260 days


62 days ago

Grumpy- Just set your thermostat to 72 degrees like I do. Believe me that will take care of any fogging problems. Come on, you only go around once, and you can’t take it with you. Yes, that means installing an air conditioner. You won’t believe how much more shop time you’ll accumulate. You can hang meat in my shop. As always, bbqKing. And yes , I still know what time it is In Sydney. (Time for an Ale.)

-- bbqKing, Lawrenceville

View Grumpy's profile

Grumpy

6716 posts in 388 days


62 days ago

King, it’s a bit early for a beer, does not mix with machinery. Air conditioned shop?, next you will be saying I should have electricity. LOL

-- Grumpy - "Always look on the bright side of life"- Monty Python

View bbqking's profile

bbqking

277 posts in 260 days


61 days ago

If you are still running on that coal fired steam equipment, that could have something to do with that fogging. BBqKing.

-- bbqKing, Lawrenceville

View Grumpy's profile

Grumpy

6716 posts in 388 days


61 days ago

What’s coal?. LOL

-- Grumpy - "Always look on the bright side of life"- Monty Python

View DAN's profile

DAN

3496 posts in 519 days


61 days ago

CLICK TO ENLARGE


-- ..... art for lifes sake ... danwalters@lumberjocks.com

View lew's profile

lew

1750 posts in 292 days


61 days ago

Grumpy,

As a scuba diver, we switched from spit to dish washing liquid. Rub a little on the inside and rinse it off with water. Don’t know if it will on shop glasses, but it won’t cost anything to try. Besides, it was easier than rubbing the diving mask with a raw cut potato.

Lew

View northwoodsman's profile

northwoodsman

53 posts in 283 days


61 days ago

I don’t know if you have any ski shops around, but they may sell an item called “Cat Crap”. It’s an anti fog agent for lenses and goggles. It works very well. It really isn’t what the name implies, but then again maybe it is? I’m sworn to secrecy.

-- NorthWoodsMan

View DAN's profile

DAN

3496 posts in 519 days


61 days ago

Photobucket

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View Grumpy's profile

Grumpy

6716 posts in 388 days


61 days ago

Thanks everybody for your suggestions. I am sure there will be an answer among those ideas.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View DAN's profile

DAN

3496 posts in 519 days


60 days ago

Photobucket

.

.
.
.
.
SAFETY FIRST

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View mrtrim's profile

mrtrim

1548 posts in 417 days


60 days ago

are you sure its fog , or maybe grog ? lol

View cpt_hammer's profile

cpt_hammer

80 posts in 349 days


60 days ago

As another fellow diver, we always used toothpaste(non gell type). Take a small dab and run it over the lenses then rinse off with some water. Works great for several days/dives.

View Bob #2's profile

Bob #2

2081 posts in 558 days


60 days ago

I’m an old school diver so I’m not up on these latest remedies.
Most tooth pastes contain sodium lauryl or laureth sulfate as a foaming surfactant.
They often have glycerine or similar glycols as well to make them feel smooth to the tongue.
It’s hard to say which or both may be helping our divers see better.
I’m pretty sure it ain’t the fluoride. <g>

Bob

-- A mind, like a home, is furnished by its owner

View EAGLE's profile

EAGLE

53 posts in 249 days


60 days ago

I have never had a problem with fogging glasses but I think I once read that if you rub the glasses with a used softener sheet from the dryer it should help. please let me know if it works because if it doesn’t I would like to know so i don’t recommend it again. Good Luck

View BeechPilotBarry's profile

BeechPilotBarry

410 posts in 239 days


60 days ago

I think the toothpaste, dish detergent, etc… improve vision because the glasses are CLEAN!

But that’s just me…

-- - Real men read directions

View Grumpy's profile

Grumpy

6716 posts in 388 days


59 days ago

Thanks jocks, there should be a remedy amongst all that.
Trim, no grog in the shop. Does not mix with sawdust too well.
Dan, those goggles suit you.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View DAN's profile

DAN

3496 posts in 519 days


58 days ago

PhotobucketPhotobucket

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View DAN's profile

DAN

3496 posts in 519 days


58 days ago

wall street safety googles
.
.
.
.
.
Photobucket

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View GaryCN's profile

GaryCN

83 posts in 471 days


58 days ago

Rain X Anti Fog

-- Quando Omni Flunkus Moritati

View Grumpy's profile

Grumpy

6716 posts in 388 days


57 days ago

Photobucket

-- Grumpy - "Always look on the bright side of life"- Monty Python

View DAN's profile

DAN

3496 posts in 519 days


56 days ago

Photobucket

-- ..... art for lifes sake ... danwalters@lumberjocks.com

View HokieMojo's profile

HokieMojo

414 posts in 265 days


56 days ago

the other two suggestions is anti fog spray for hockey visors and for paintball masks. Both have worked well for those uses and would probably help you too. Not too expensive either.

View DAN's profile

DAN

3496 posts in 519 days


56 days ago

Photobucket

-- ..... art for lifes sake ... danwalters@lumberjocks.com

You must be signed in to reply.

Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community

Woodworking StoreApparel StoreMake a Donation
Bookmark And Share This Page
  • View all advertisers
  • Advertise with us

DISCLAIMER: All views and comments posted by members are not necessarily those of LumberJocks.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase