LumberJocks

LPS 1 - Will it work in a wood shop ?

  • Advertise with us

« back to Finishing forum

Forum topic by 1yeldud1 posted 03-26-2013 01:44 AM 552 views 0 times favorited 5 replies Add to Favorites Watch
View 1yeldud1's profile

1yeldud1

292 posts in 1731 days


03-26-2013 01:44 AM

The factory I work at uses “LPS1” spray lube and I have an opportunity to purchase at cost. I did a search on the internet and the manufacturer says it does not contain silicone. I am needing something to put on my precision hand tools to keep the rust at bay. Has anyone used this spray in there wood shop with good results ? is ther any other spray that I can use on these steel surfaces – tried paste wax and I dont like the results on my precision tools – Thanks for the replys.


5 replies so far

View PASs's profile

PASs

566 posts in 1787 days


#1 posted 03-26-2013 01:48 AM

I use LPS2 and LPS3 everywhere.
But haven’t used LPS1 yet…just WD-40…and I use it on a lot of my tools.
I just make sure any tools that come in contact with wood are wiped clean before use.

-- Pete, "It isn't broken, you just aren't using it right."

View Fuzzy's profile

Fuzzy

293 posts in 2677 days


#2 posted 03-27-2013 02:54 AM

I LOVE the stuff … spray it on all of my tool surfaces … wipe it on hand tools … use it in an ultrasonic tank to clean small parts … GREAT STUFF. I usually buy a 5 gal. pail of it and split it with a friend. I put it in a sprayer that you can charge with compressed air after adding the liquid … MUCH more economical.

-- - dabbling in sarcasm is foolish … if you’re not proficient at it, you end up looking stupid … ... ...

View 1yeldud1's profile

1yeldud1

292 posts in 1731 days


#3 posted 03-27-2013 09:21 AM

In a wood shop no problems with “spoiled” finishes ?

View RonInOhio's profile

RonInOhio

720 posts in 1553 days


#4 posted 03-27-2013 09:31 AM

Some woodworking magazine did a comparison of around 7 rust inhibitor products and I’m pretty sure LPS came out near the top if not at the top in their testing. Need verification but I know it did well in their tests.

View PASs's profile

PASs

566 posts in 1787 days


#5 posted 03-27-2013 12:47 PM

1yeldud1, can certainly be a problem.
As a hobbyist who does his own auto work, mr fixit work, and woodwork, all in a two-car garage, cross-contamination is always a concern, and requires extra precautions when switching genre’s.
I’ve yet to ruin a finish with oil….but I do have a lot of automotive stuff (and everything else) covered in sawdust.

BTW every once in a while I hook an electric leaf blower up and blow out the shop (full respirator of course).
Amazing what blows out from behind nooks and crannies.

-- Pete, "It isn't broken, you just aren't using it right."

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase