LumberJocks

Craftsman Professional 10” Model #152.221240

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Kahr posted 525 days ago 1203 views 0 times favorited 2 replies Add to Favorites Watch
View Kahr's profile

Kahr

10 posts in 526 days


525 days ago

Topic tags/keywords: 152221240 tablesaw

I have a Craftsman Professional 10” Model #152.221240 that is wired for 110 currently. I would like to change to 240.

Does anyone have this saw running on 240?

Thanks


2 replies so far

View knotscott's profile

knotscott

5428 posts in 2009 days


#1 posted 525 days ago

I had that saw on 240v (aka 220v) for over 3 years. In my case, switching to 240v made a notable difference in startup and recovery speed, which helped it plow through thicker materials with less bogging. There are no guarantees that yours will respond the same, depending on your supply circuit. If you have 240v available, all you’ll need to do is change the plug to fit your 240v outlet, and follow the schematic inside the wire junction box….it takes about 5 minutes for the rewire. It ran great with good 3/32” thin kerk blades.

You can also gain some rip capacity pretty easily on that saw if you want to.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Kahr's profile

Kahr

10 posts in 526 days


#2 posted 525 days ago

Thanks for the information. I am just getting started and can use all the help I can get.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase