Happy day- wish list complete.

« back to Power Tools, Hardware and Accessories forum

19 posts in 131 days

92 days ago

I finally received my jointer today, a Grizzly G0654. A jointer was the last thing on my absolutely must have tool list. With that said, they really lathered this thing up good with packing grease, and it seems like there’s going to be a lot more assembly than I expected. Wish I knew some Las Vegan woodworkers so I could have a helper on days like this. Still a very happy day though.

6 replies so far

Dallas home \| projects \| blog 1934 posts in 684 days #1 posted 92 days ago	Congratulations! Luckily, I’m in Texas so I can honestly say I would be happy to help if you brought it over! -- Improvise.... Adapt...... Overcome!
RodNGun home \| projects \| blog 98 posts in 501 days #2 posted 92 days ago	Wish list complete??? Is that possible? Congrats on your new tool, take your time and enjoy setting it up the way you want it.
JoeWhite home \| projects \| blog 19 posts in 131 days #3 posted 92 days ago	RodNGun, yeah that was probably a bad choice of words. My immediate wish list is complete, I now have a complete shop. Of course there’s ton’s of other things I’d like to add, or upgrade.
jeff home \| projects \| blog 442 posts in 1662 days #4 posted 92 days ago	shops are never complete,we are men!... -- Jeff,Tucson,Az.
Bieser home \| projects \| blog 84 posts in 232 days #5 posted 90 days ago	Joe I hear you on the grease. I just purchased a jointer from grizzly. Shop I think will smell like grease for months.
JoeWhite home \| projects \| blog 19 posts in 131 days #6 posted 90 days ago	Bieser, just curious. Did you pull off the feed tables and clean up everything internal, or did you just clean off the external stuff? I only did the external stuff, and I’m hoping that doesn’t cause problems later.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8847
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	246
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	32
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	69
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	96
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1600
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3595
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15984
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2099
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	501
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2909
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	813
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	925
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	778
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2778
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1553
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6133

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
fn2bhad's Profile	fn2bhad	2 minutes ago		sign in to get readership tracking
Handplanes of your dreams	Bertha	5 minutes ago	by shampeon	sign in to get readership tracking
cupboard doors	don38	6 minutes ago	by Fishinbo	sign in to get readership tracking
ARRRRRRGGG!! Stupid Hand Planes!	Bsmith	10 minutes ago	by PurpLev	sign in to get readership tracking
Lawn mower blade as tool steel?	jtriggs	10 minutes ago	by crank49	sign in to get readership tracking
Worth $400? (Grizzly 16" BS)	Buckethead	11 minutes ago	by Mainiac Matt	sign in to get readership tracking
Workshop Floor Sweep Attachment	steliart	11 minutes ago	by hjt	sign in to get readership tracking
memorial cross plan	airman	16 minutes ago	by airman	sign in to get readership tracking
Walnut & Alder Computer Desk	Hutch	16 minutes ago	by Joe Lyddon	sign in to get readership tracking
Wish I had built this	cajunpen	17 minutes ago	by steliart	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

fn2bhad's Profile

fn2bhad

2 minutes ago

to get readership tracking

Handplanes of your dreams

Bertha

5 minutes ago

by shampeon

to get readership tracking

cupboard doors

don38

6 minutes ago

by Fishinbo

to get readership tracking

ARRRRRRGGG!! Stupid Hand Planes!

Bsmith

10 minutes ago

by PurpLev

to get readership tracking

Lawn mower blade as tool steel?

jtriggs

10 minutes ago

by crank49

to get readership tracking

Worth $400? (Grizzly 16" BS)

Buckethead

11 minutes ago

by Mainiac Matt

to get readership tracking

Workshop Floor Sweep Attachment

steliart

11 minutes ago

by hjt

to get readership tracking

memorial cross plan

airman

16 minutes ago

by airman

to get readership tracking

Walnut & Alder Computer Desk

Hutch

16 minutes ago

by Joe Lyddon

to get readership tracking

Wish I had built this

cajunpen

17 minutes ago

by steliart

to get readership tracking

Happy day- wish list complete.

6 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...