LumberJocks

Delta Planer parts

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Dorado posted 500 days ago 778 views 0 times favorited 6 replies Add to Favorites Watch
View Dorado's profile

Dorado

5 posts in 503 days


500 days ago

I’ve been waiting since the early part of February for replacement parts for my Delta planer. I have found out through various forums that parts from Delta are back ordered due to a major screw up within the recent sale of the company.

I”m wondering if there are other resources that would be able to supply the parts in a timely manner , i.e. used, so that I can get back into the groove and finish milling.

Thanks and as always Work Safely!

Dorado


6 replies so far

View JustJoe's profile

JustJoe

1554 posts in 643 days


#1 posted 500 days ago

There are lots of company selling replacement parts online. What company are you waiting on it from now?
EDIT: And what part are you looking for?

-- This Ad Space For Sale! Your Ad Here! Reach a targeted audience! Affordable Rates, easy financing! Contact an ad represenative today at JustJoe's Advertising Consortium.

View Fred Hargis's profile

Fred Hargis

1655 posts in 1098 days


#2 posted 500 days ago

If you google the Delta part number as in “Delta XXXXXX-XXXX”, you may find an aftermarket dealer that has it in stock.

-- I long for the days when Coke was a cola, and a joint was a bad place to be (Merle Haggard)

View Chris208's profile

Chris208

168 posts in 874 days


#3 posted 500 days ago

What parts are they? I went through the same hung recently with my Delta band saw. I found out that all the parts I needed were not proprietary to Delta and were available through either McMaster Carr, or locally.

If it’s hardware, and not an actual part, you can find it.

Chris

View Dorado's profile

Dorado

5 posts in 503 days


#4 posted 499 days ago

The parts I need are a drive pulley, drive belt, the key to hold the pulley to the shaft and the cover that guards the pulley assembly.

I’ll try to google the parts and see what pops up. McMaster Carr is something I hadn’t thought of.

Thanks!

Dorado

View firemanbsa's profile

firemanbsa

6 posts in 1896 days


#5 posted 499 days ago

Check with a local industrial bearing supplier or with Granger the pulley will need to be sized for the shaft and the proper diameter to get the correct speed. The drive belt and key should be available at a good parts store or hardware store. On the cover I would check with a local heating and air company that makes duct work. They should be able to bend and rivit a cover you may need to add a little reinforcement with some light angle Iron avalable at most hardware stores or many big box stores.

-- parts is parts

View CTobes's profile

CTobes

1 post in 499 days


#6 posted 499 days ago

What model of Delta Planer are the parts for? I have a TP305 with a burned up motor and could make you a great deal on the parts you’re looking for.

CTobes

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase