Older DELTA Rockwell Overhead pin router

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by liketosail posted 03-17-2013 01:43 AM 2053 views 0 times favorited 4 replies Add to Favorites Watch
View liketosail's profile


31 posts in 1028 days

03-17-2013 01:43 AM

Does anyone have

one of these?
And do you like it and it’s best uses and weak points?

4 replies so far

View rootertooter's profile


12 posts in 2026 days

#1 posted 03-17-2013 02:03 AM

i don’t any longer,but you have to make a lot of doors or trim to make it worth having It takes up a lot of shop space…

-- bob mt pleasant tn

View Grandpa's profile


3246 posts in 1762 days

#2 posted 03-17-2013 02:45 AM

Check with Loren

View liketosail's profile


31 posts in 1028 days

#3 posted 03-17-2013 03:46 AM

This thing runs good on 110 v most I have found are 220v , not sure if it can be wired 220v.
No pin came with it so I will have to make one.
I plan to make some fluted boards for an archway with this..
I came across this today when I went to buy a older shaper and he offered me this pin router for $25.00 more
So I bought it and the shaper for $150.00 total.
one of my best deals yet on wood working tools.

View bigblockyeti's profile


2525 posts in 808 days

#4 posted 12-09-2013 01:20 PM

A friend gave me one of these, I think a little newer than yours based on how the casting around the base looks. Mine is 230V and will need only a little wiring to get it up and running. It has two spindles, one on top and one below and the motor can be moved to either with the pin in the opposite. Even the machined surfaces still look good! Can’t wait to put it to work.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics