Removal of dried Weldbond II

  • Advertise with us

« back to Joinery forum

Forum topic by madts posted 03-14-2013 03:47 PM 1251 views 0 times favorited 1 reply Add to Favorites Watch
View madts's profile


1855 posts in 2309 days

03-14-2013 03:47 PM

Topic tags/keywords: trick

We had some warranty done on our engineered wood floor. This floor already has finish on it and there is some glue squeeze out showing at the glue joints. Weldbond II was used. We have tried Googon without any luck.

Does anybody have any ideas, apart from refinishing the floor.

-- Thor and Odin are still the greatest of Gods.

1 reply so far

View Mark Kornell's profile

Mark Kornell

1169 posts in 2500 days

#1 posted 03-15-2013 01:16 AM

If the glue hasn’t bonded into the finish, you might be able to get it off using a hand plane iron laid flat on the floor and flush-planing it.

Try it on a small bit first. If you’re lucky, the glue will just pop off. If the glue has bonded into the finish, it will want to pull up the finish, and you are probably looking at refinishing.

-- Mark Kornell, Kornell Wood Design

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics