LumberJocks

mud cabinet design

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by Vjeko posted 02-27-2013 09:12 AM 630 views 0 times favorited 1 reply Add to Favorites Watch
View Vjeko's profile

Vjeko

128 posts in 2079 days


02-27-2013 09:12 AM

Topic tags/keywords: question

I saw this mud cabinet project:
http://lumberjocks.com/projects/80025
and posed a few questions there as well as directly to the author
but have not received any replies, so was wondering if
the more experienced could give a few thoughts on the breakdown
of parts, joinery, levelling and fixing to floor/wall etc. ?

I want to make a couple of open back cabinets with no floor i.e. verticals
will be like in the mud cabinet above with euro hinge doors on one cabinet
and sliding doors on the other. I also have additional
constraints that there is water heating in floor (can’t drill everywhere) and
electricals/wiring in concrete ceiling above (can’t drill everywhere).
Since there is water heating in floor over insulation, the floor is effectively
“floating”, so I’m also worried about “sinking” of the cabinet if full of books
etc., so any fixing of the verticals to the wall needs to be done in a way that the cabinet can
move down a little just in case.

-- Vjeko Balas - Croatia


1 reply so far

View TCCcabinetmaker's profile

TCCcabinetmaker

925 posts in 1020 days


#1 posted 03-01-2013 03:37 AM

It looks to be made like normal cabinets, the open bottoms are just a 4 sided box instead of a 5 sided box.

-- The mark of a good carpenter is not how few mistakes he makes, but rather how well he fixes them.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase