LumberJocks

delta 34-670 blade stops cutting wood

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by brotherj posted 02-27-2013 08:34 AM 1198 views 0 times favorited 5 replies Add to Favorites Watch
View brotherj's profile

brotherj

3 posts in 1382 days


02-27-2013 08:34 AM

Topic tags/keywords: question

i have a delta 10 in table saw direct drive,motor roars bad weird,while cutting woood blade stops cutting motor still running.do i need a new motor??


5 replies so far

View Grandpa's profile

Grandpa

3256 posts in 2142 days


#1 posted 02-27-2013 05:36 PM

I doubt it. Sounds like the blade is loose or the drive is broken. Possibly a shaft that drives the blade but is inside the motor. Look into the exact cause. If it is inside the motor case there is possibly a repair part available from www.ereplacement.com They have a lot of parts and often videos on the proceedure to install the new part.

View MrUnix's profile

MrUnix

4241 posts in 1665 days


#2 posted 02-27-2013 05:55 PM

Pull the motor and take off the end cover to check the belt.. most likely stripped and needs replacement (yes, it does have a belt!!).

Cheers
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View brotherj's profile

brotherj

3 posts in 1382 days


#3 posted 02-28-2013 04:12 PM

i thank you for your imput.if it was belt why would bade turn and cut feeding real slow,snail slow.when force to feed wood blade stops.noise as soon as turned on,weird loud noise.

View MrUnix's profile

MrUnix

4241 posts in 1665 days


#4 posted 02-28-2013 07:59 PM

It’s a cogged belt:

Eventually the ‘cogs’ get worn/ground/broken off and you experience what you describe. Pull the end cap off the motor and verify.

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View Hugh1's profile

Hugh1

4 posts in 1368 days


#5 posted 03-12-2013 03:29 PM

Help guys, I think I have the same problem on the used D34-670 that I picked up. How do I get to the belt to inspect or replace it? Thanks.

Hugh

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com