Spraying epoxy paint

97 posts in 444 days

117 days ago

It’s not wood finishing, but it is finishing. I’m thinking about spraying a bath tub/ shower with epoxy paint. What I’ve found online is that there are epoxy paints specifically designed for tube, but I’ve looked at garage floor paint and can’t find a difference. I’ll pick up HF spray guns and just use the compressor. Needle size???Any experience or thoughts out there?

-- It is what it is...

3 replies so far

wisno home \| projects \| blog 88 posts in 1209 days #1 posted 117 days ago	Yes you can spray epoxy paint. make sure you mixed your epoxy paint and the hardened in the right formula. You may need to add some more thinner to adjust the viscosity. Good luck -- http://www.wisnofurniturefinishing.com/
JackieDeng home \| projects \| blog 7 posts in 104 days #2 posted 104 days ago	Polyurethane Coating may be better Details on it can be found Epoxy Paint & Coating Steel Structure Coating Alkyd Primer and Undercoater Exterior Alkyd Paint Semi-Gloss Finish Super Alkyd
DouginVa home \| projects \| blog 446 posts in 471 days #3 posted 104 days ago	At Home Depot Epoxy paint is sometimes referred to as appliance paint. I’ve used in on hand planes and plan on using it on a jointer this summer. -- Just a man with his chisel.........

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8848
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	246
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	32
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	69
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	96
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1600
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3595
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15984
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2102
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	501
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2911
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	813
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	925
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	778
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2778
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1553
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6136

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Wooden plane for my 3 year old son	shampeon	2 seconds ago	by Brandon	sign in to get readership tracking
Cherry Display Case	GT350	46 seconds ago	by GT350	sign in to get readership tracking
router table	whitegoodman	6 minutes ago	by NiteWalker	sign in to get readership tracking
My first turning.	J	8 minutes ago	by GT350	sign in to get readership tracking
Little Shed Addition	woodshaver	8 minutes ago	by Woodwrecker	sign in to get readership tracking
MarkusPaulos's Profile	MarkusPaulos	9 minutes ago		sign in to get readership tracking
Bandsaw box	neverstoplearnin	13 minutes ago		sign in to get readership tracking
jeannarendon's Profile	jeannarendon	13 minutes ago	by surfin2	sign in to get readership tracking
shop storage	neverstoplearnin	18 minutes ago		sign in to get readership tracking
patriters's Profile	patriters	18 minutes ago		sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Wooden plane for my 3 year old son

shampeon

2 seconds ago

by Brandon

to get readership tracking

Cherry Display Case

GT350

46 seconds ago

by GT350

to get readership tracking

router table

whitegoodman

6 minutes ago

by NiteWalker

to get readership tracking

My first turning.

8 minutes ago

by GT350

to get readership tracking

Little Shed Addition

woodshaver

8 minutes ago

by Woodwrecker

to get readership tracking

MarkusPaulos's Profile

MarkusPaulos

9 minutes ago

to get readership tracking

Bandsaw box

neverstoplearnin

13 minutes ago

to get readership tracking

jeannarendon's Profile

jeannarendon

13 minutes ago

by surfin2

to get readership tracking

shop storage

neverstoplearnin

18 minutes ago

to get readership tracking

patriters's Profile

patriters

18 minutes ago

to get readership tracking

Spraying epoxy paint

3 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...