Lumber for sale in the Minneapolis area

« back to Woodworking Trade & Swap forum

Marcus

home | projects | blog

520 posts in 189 days

97 days ago

The lumber is not mine, just someone I found on Craigslist, but it’s nice enough that it was worth sharing

http://minneapolis.craigslist.org/hnp/mat/3560290047.html

He’s a cabinet maker closing up shop to focus on the family a bit more and take a more regular hours job. I probably got about 200bd ft from him, and there is plenty left. He had a ton of cherry that was 10’ length that I wish I could transport. Most of his walnut is gone, but he still had a bit left and a few of the 20” wide planks.

4 replies so far

Pdub home \| projects \| blog 826 posts in 1349 days #1 posted 97 days ago	Wish I lived closer. It would be an 11 hr. drive just to get there. If it was later in the year I would make a trip to buy wood and watch baseball. Just my luck! -- Paul, North Dakota, USAF Ret.
Kreegan home \| projects \| blog 1330 posts in 316 days #2 posted 97 days ago	Thanks for pointing this out. Wish I had more room to store this. I could use some wider cherry. -- Rich;) -"Dada make a big mess?" "Yes Dada made a big mess."
Marcus home \| projects \| blog 520 posts in 189 days #3 posted 96 days ago	I don’t have any room for it either. In fact I still have 100bd ft in my car that I need to clear room for!
MrsN home \| projects \| blog 917 posts in 1695 days #4 posted 96 days ago	wow, if onlly I had room for that! I might have to convince my husband that his steel storage rack needs to be a cherry storage rack. -- ----- www.KNWoodworking.com ----- --

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8792
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3549
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15782
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2841
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	902
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
What should I do with these?	Brandon	5 seconds ago	by pintodeluxe	sign in to get readership tracking
Can I flatten this?	muleskinner	45 seconds ago	by redSLED	sign in to get readership tracking
simple sign	sawdustmaker101	1 minute ago		sign in to get readership tracking
Looking at a Ridgid jointer. Is this the right tool?	noone	2 minutes ago	by a1Jim	sign in to get readership tracking
ARABIAN HORSE HEAD	RWAARM	2 minutes ago	by diggerdelaney	sign in to get readership tracking
What type of wooder filler can i use to cover screw heads in pine that won't blotch when varathaned?	Jim Reeves	3 minutes ago	by Jim Reeves	sign in to get readership tracking
Handplanes of your dreams	Bertha	3 minutes ago	by Brandon	sign in to get readership tracking
Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp	SPalm	5 minutes ago	by PurpLev	sign in to get readership tracking
Finishing a Maple Crib	Peteyb	5 minutes ago	by redSLED	sign in to get readership tracking
I needed a new marking gauge	parkerdude	7 minutes ago	by Sergio	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

What should I do with these?

Brandon

5 seconds ago

by pintodeluxe

to get readership tracking

Can I flatten this?

muleskinner

45 seconds ago

by redSLED

to get readership tracking

simple sign

sawdustmaker101

1 minute ago

to get readership tracking

Looking at a Ridgid jointer. Is this the right tool?

noone

2 minutes ago

by a1Jim

to get readership tracking

ARABIAN HORSE HEAD

RWAARM

2 minutes ago

by diggerdelaney

to get readership tracking

What type of wooder filler can i use to cover screw heads in pine that won't blotch when varathaned?

Jim Reeves

3 minutes ago

by Jim Reeves

to get readership tracking

Handplanes of your dreams

Bertha

3 minutes ago

by Brandon

to get readership tracking

Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp

SPalm

5 minutes ago

by PurpLev

to get readership tracking

Finishing a Maple Crib

Peteyb

5 minutes ago

by redSLED

to get readership tracking

I needed a new marking gauge

parkerdude

7 minutes ago

by Sergio

to get readership tracking

Lumber for sale in the Minneapolis area

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...