Medallist podium Boxes

« back to Designing Woodworking Projects forum

2 posts in 109 days

106 days ago

Topic tags/keywords: podium medallist stackable plywood boxes question

Hi After an extensive internet search I came across this site and a question posed by ADHDAN. I would like to contact him to ask how he went on making these and if he has any sizes or plans?
I cannot send him an email yet as I have only just joined, Could anyone put me in touch with him in case he does not read this?
Many thanks Kevin

-- ouch that hurts

2 replies so far

ADHDan

home | projects | blog

105 posts in 277 days

#1 posted 106 days ago

Hi thumbasher, I don’t have any plans but I’d be happy to describe how I made the boxes. They were very, very simple. All boxes were made from 3/4” plywood with pocket screw joinery. The biggest box was slightly wider (length/widthwise) than the smaller boxes, and it was as tall as the other two boxes stacked together. This allowed the smaller boxes to nest inside the bigger box.

-- Dan in Minneapolis, woodworking since 11/11.

thumbasher

home | projects | blog

2 posts in 109 days

#2 posted 81 days ago

Hi Thanks for the reply.
Do you still have the sizes?
Many thanks
Thumbasher

-- ouch that hurts

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8792
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	79
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3547
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15775
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2840
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	808
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	901
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Blue Collar Woodworking... The best woodworking show since the invention of wood!	StumpyNubs	57 seconds ago	by DIYaholic	sign in to get readership tracking
Now, this is the way to cut veneer !	shipwright	1 minute ago	by shipwright	sign in to get readership tracking
New jointer	sphayden	4 minutes ago	by sphayden	sign in to get readership tracking
Cutting bread boards from maple and walnut	wlojr	5 minutes ago		sign in to get readership tracking
Miniature Tool Collection	ArtRafael	7 minutes ago	by ArtRafael	sign in to get readership tracking
Tablesaw Accessory Storage Cabinet	TDSpade	7 minutes ago	by NormG	sign in to get readership tracking
My misadventures trying to buy a flat router table....	noone	7 minutes ago	by kdc68	sign in to get readership tracking
Does not do its only job!	Cole Tallerman	7 minutes ago	by Rick M.	sign in to get readership tracking
Boat Cradle - Baby Tender II	William	8 minutes ago	by DIYaholic	sign in to get readership tracking
Lap desk finally finished.... made from free scraps.	AngieO	8 minutes ago	by AngieO	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Blue Collar Woodworking... The best woodworking show since the invention of wood!

StumpyNubs

57 seconds ago

by DIYaholic

to get readership tracking

Now, this is the way to cut veneer !

shipwright

1 minute ago

by shipwright

to get readership tracking

New jointer

sphayden

4 minutes ago

by sphayden

to get readership tracking

Cutting bread boards from maple and walnut

wlojr

5 minutes ago

to get readership tracking

Miniature Tool Collection

ArtRafael

7 minutes ago

by ArtRafael

to get readership tracking

Tablesaw Accessory Storage Cabinet

TDSpade

7 minutes ago

by NormG

to get readership tracking

My misadventures trying to buy a flat router table....

noone

7 minutes ago

by kdc68

to get readership tracking

Does not do its only job!

Cole Tallerman

7 minutes ago

by Rick M.

to get readership tracking

Boat Cradle - Baby Tender II

William

8 minutes ago

by DIYaholic

to get readership tracking

Lap desk finally finished.... made from free scraps.

AngieO

8 minutes ago

by AngieO

to get readership tracking

Medallist podium Boxes

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...