LumberJocks

Outfeed Table

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by scvwooding posted 571 days ago 712 views 0 times favorited 3 replies Add to Favorites Watch
View scvwooding's profile

scvwooding

15 posts in 575 days


571 days ago

I have a Craftman Contractor table saw with the motor attached to the rear. The fence system runs on two rails, one to the front and one to the rear. i have a small shop and would like to attach an outfeed table to the saw that will fold down when not in use. I have seen a sample on youtube but the saw did not have a rear rail for the fence. Any ideas out there on how to make an outfeed that folds down with this kind of fence rail system? Pictures would help. Thx


3 replies so far

View TeamTurpin's profile

TeamTurpin

85 posts in 685 days


#1 posted 571 days ago

Peachtree has plans for that. Look for the table saw extension plans/hardware here.

-- http://www.teamturpin.org/house/shop.htm

View scvwood27's profile

scvwood27

59 posts in 575 days


#2 posted 570 days ago

perfect. Thanks

View JesseTutt's profile

JesseTutt

802 posts in 734 days


#3 posted 570 days ago

Attach a perminate extension to the back rail to get out beyond the motor and use diagonal supports to the back legs of the saw. Then add a hinged table.

Don’t forget to add the miter slots.

-- Jesse, Saint Louis, Missouri

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase