LumberJocks

10 parts

  • Advertise with us

« back to Woodturning forum

Forum topic by Diggerjacks posted 01-18-2013 06:20 PM 914 views 0 times favorited 23 replies Add to Favorites Watch
View Diggerjacks's profile

Diggerjacks

1785 posts in 1891 days


01-18-2013 06:20 PM

Hello

I was looking for a technic to divide a cercle in 10 parts

Thanks for your responses

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit


23 replies so far

View Bricofleur's profile

Bricofleur

1197 posts in 1946 days


#1 posted 01-18-2013 06:22 PM

Hi Jack,

Use a 40 teeth saw blade and mark at each four tooth. :-)

Best,

Serge

http://atelierdubricoleur.wordpress.com

-- Learn from yesterday, work today and enjoy success tomorrow. -- http://atelierdubricoleur.wordpress.com

View Roger Clark aka Rex's profile

Roger Clark aka Rex

6940 posts in 2187 days


#2 posted 01-18-2013 06:25 PM

Do you want equal parts?

-- Roger-R, Republic of Texas. "Always look on the Bright Side of Life" - An eyeball to eyeball confrontation with a blind person is as complete waste of Time.

View Diggerjacks's profile

Diggerjacks

1785 posts in 1891 days


#3 posted 01-18-2013 06:37 PM

Hello

Thanks for yours responses

I have a circle piece ( like a plate) on my lathe and I will make 10 holes at equal distance whatever the diamater of the piece.

Thanks

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Bricofleur's profile

Bricofleur

1197 posts in 1946 days


#4 posted 01-18-2013 06:46 PM

So you will end up with an indexing wheel ? That will be handy !

Best,

Serge

http://atelierdubricoleur.wordpress.com

-- Learn from yesterday, work today and enjoy success tomorrow. -- http://atelierdubricoleur.wordpress.com

View helluvawreck's profile

helluvawreck

16043 posts in 1619 days


#5 posted 01-18-2013 06:47 PM

Draw your circle. Draw a diameter through the center. Use the line and a protractor to draw a second line through the center to the circle at 36 degrees to the first line. Set the points of your dividers to the two points where the lines intersect the circle. This setting should be very close depending on how accurate your lines were. Walk your dividers around your circle very lightly to check the setting. If it’s close enough for your needs your ready to go. If not then adjust the dividers ever so slightly and check again. Once set you’re ready to go.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Diggerjacks's profile

Diggerjacks

1785 posts in 1891 days


#6 posted 01-18-2013 07:14 PM

Hello

Thanks to all for your responses

I will make an indexing wheel

I was thinking there was another solution but …
Another project ==> Another jig
Thanks

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View rance's profile

rance

4149 posts in 1913 days


#7 posted 01-18-2013 07:19 PM

I like the 40 teeth saw blade idea. Personally, I’d probably draw it in SketchUp and print it out. You can also search for segmented circles on the web and print those out.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

View bandit571's profile

bandit571

7519 posts in 1436 days


#8 posted 01-18-2013 08:12 PM

360 degrees in a circle , divide by 10=

-- A Planer? I'M the planer, this is what I use

View StumpyNubs's profile

StumpyNubs

6272 posts in 1553 days


#9 posted 01-18-2013 11:20 PM

When I get a pizza they usually just divide it into 10 random parts. One piece is half the pizza, another piece is just a little sliver… GREAT! Now I have to order a pizza! THANKS A LOT DIGGER!!!!!!

-- It's the best woodworking show since the invention of wood... New episodes at: http://www.stumpynubs.com

View Roger's profile

Roger

15362 posts in 1557 days


#10 posted 01-18-2013 11:35 PM

I had an answer, then, I seen Stumps response, now I’m think a cold one to go with that pizza…. I’ll take the sliver…..I gotta keep up my image….. :)

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View Wildwood's profile

Wildwood

1245 posts in 887 days


#11 posted 01-19-2013 11:24 AM

Do not see 10 segments at link, but take a look anyway if find something can use just print it off an glue to your wood, plastic, or steel.

http://www.smithart.us/download.htm

-- Bill

View kizerpea's profile

kizerpea

746 posts in 1120 days


#12 posted 01-19-2013 01:45 PM

10-sides decagon
center angle 36 deg
miter 72 deg

infomation sourse THE BEALL TOOL CO,,,,NEWARK OHIO..

-- IF YOUR NOT MAKING DUST...YOU ARE COLLECTING IT! SOUTH CAROLINA.

View Bricofleur's profile

Bricofleur

1197 posts in 1946 days


#13 posted 01-19-2013 03:57 PM

@Wildwood: Thanks for the link. 10 segments is not shown perhaps because you can use the 20 and skip one after the other to get the 10.

Best,

Serge

http://atelierdubricoleur.wordpress.com

-- Learn from yesterday, work today and enjoy success tomorrow. -- http://atelierdubricoleur.wordpress.com

View Diggerjacks's profile

Diggerjacks

1785 posts in 1891 days


#14 posted 01-19-2013 05:59 PM

Hello

Thanks a lot to everybody for your responses

To StumpyNubs and Roger : ” Bon app├ętit”

To Wildwood : Thanks for the link

I will print a lot circular graph for a lot of futurs ideas.

To Bricofleur : Thanks for the interest of this blog and I will use a 20 segments / 2

Thanks

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Diggerjacks's profile

Diggerjacks

1785 posts in 1891 days


#15 posted 01-19-2013 06:56 PM

Hello

With the link of wildwood and corel draw I have made my circular graph

I can mail you a pdf circular graph 10 segments for who want

Thanks for yours responses

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

showing 1 through 15 of 23 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase