LumberJocks

Card scraper burnishing jig

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Slacker posted 09-04-2008 03:30 AM 3684 views 0 times favorited 1 reply Add to Favorites Watch
View Slacker's profile

Slacker

178 posts in 2391 days


09-04-2008 03:30 AM

I saw a podcast from woodsmith.com which described the process of putting the hook on a card scraper. In it, the guy uses this jig he made to burnish the scraper using a block of wood with a quarter-inch drill bit inserted into a ledge that was cut at an angle.

The podcast mentions that a drawing to build the jig was free at woodsmith.com. I went to the website and could not find it. Does anyone have a link?

-- Adapt, improvise, overcome


1 reply so far

View lew's profile

lew

10094 posts in 2445 days


#1 posted 09-04-2008 08:41 PM

Try Here:

http://www.woodsmith.com/issues/171/extras/sharpening-a-scraper/

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase