LumberJocks Woodworking Forum banner

sawstop fire

1K views 3 replies 2 participants last post by  lowellmk 
#1 · (Edited by Moderator)
Sawstop fired( metal clamp too close), and now blade doesn't retract below table. Cuts fine. Gets down to 1/4 ". Anyone have experience with this?
 
#2 ·
I have a suggestion that you might try (I did the same with my SS).

1) Unplug saw

2) Raise blade as high as it can go.

3) Carefully grip the blade and lift upward to re-seat the mechanism.

You may also want to check see if compacted sawdust may be obscuring the inner works.

Please let me know what you did to fix this.

Good luck..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top