Jet JJ-12-1 Question

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Woodendeavor posted 01-04-2013 10:56 PM 1824 views 0 times favorited 4 replies Add to Favorites Watch
View Woodendeavor's profile


276 posts in 2632 days

01-04-2013 10:56 PM

Topic tags/keywords: jet jointer power tool

Just picked up a 12” jet jointer. The previous owner could not tell me much about the machine. Thought maybe someone on here had some knowledge of it. The rack and pinion fence adjustment will not move, the wheel turns freely but the fence does not move. Thanks in advance

4 replies so far

View kizerpea's profile


774 posts in 2393 days

#1 posted 01-05-2013 12:37 PM

post some pics ..would b a big help


View Bluepine38's profile


3379 posts in 3111 days

#2 posted 01-05-2013 06:15 PM

The first thing I would do is to to, go to the manuals section and see if I could download the
pdf manual for the jointer. That should give you the parts breakdown and some troubleshooting tips. I do
not know that much about Jet tools, but they seem to have a good internet site.

-- As ever, Gus-the 79 yr young apprentice carpenter

View runswithscissors's profile


2766 posts in 2050 days

#3 posted 01-05-2013 09:58 PM

Is the wheel properly fastened to its shaft, either with a key in a slot or a roll pin? If it uses a pin, it may have sheared off.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View Woodendeavor's profile


276 posts in 2632 days

#4 posted 01-06-2013 02:42 AM

Sorry for the delay in not getting back to this. We had a family medical emergency come up and it will be a week before I can get back to the machine

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics