LumberJocks

Fixing drill press table?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Belg1960 posted 12-25-2012 11:29 AM 732 views 0 times favorited 2 replies Add to Favorites Watch
View Belg1960's profile

Belg1960

833 posts in 1818 days


12-25-2012 11:29 AM

Topic tags/keywords: question

Good morning and Merry Christmas, I have an issue with my drill press, the table has gone out of parallel to the chuck. I see the way to adjust left to right but mine is out front to back and I don’t see any adjustment feature for this??? Is it possible that there would be none? It is an Enlon model KS-13F 16 speed floor drill press. Any thoughts would be welcome.

-- ***Pat*** Rookie woodworker looking for an education!!!


2 replies so far

View hhhopks's profile (online now)

hhhopks

566 posts in 1131 days


#1 posted 12-25-2012 01:04 PM

If you don’t have an adjustment, you will need to shim it.
Good Luck.

Merry Christmas.

-- I'll be a woodworker when I grow up. HHHOPKS

View plantek's profile

plantek

303 posts in 1552 days


#2 posted 12-25-2012 06:43 PM

A shim really is the only option.
If you don’t have the habit of tightening the column lock before starting work ther may be debris in there causeing the issue. I’d clean the area and lock then recheck.

-- If you want it and it's within reason... It's on it's way!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase