steel vise screw and nut for sale

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by fumehappy posted 11-29-2012 03:44 AM 1434 views 0 times favorited 1 reply Add to Favorites Watch
View fumehappy's profile


137 posts in 2219 days

11-29-2012 03:44 AM

Okay so once upon a time i purchased an oak leg vise. At that point I didn’t know what a vise was used for. Unfortunately the oak jaws were lost in a fire, but I had the screw removed at that time. I was holding onto the screw in hopes of building my own jaws. However I recently was gifted a Littlestown 10 inch vice that I’m going to be mounting as my face vise. So this screw and and nut can go to someone who can use them. All teeth are intact and the nut turns all the way from one end to the other. No damage or visible wear. I think the jaws said “acme”, and i’ll wager that referred to the vise thread. The one downside is one of the flange wings on the nut is broken off. It is included. The nut has a ridge though, so you should be able to mortise it into your bench leg without fear of it turning. The original steel vise jaw pads are included as well. I was going to list it on the bay, but figured i’d give a crack here first.

First PM for 45$ plus shipping wins!


1 reply so far

View fumehappy's profile


137 posts in 2219 days

#1 posted 12-05-2012 04:16 PM

Vise is still available… Will post an ebay link if i list it there.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics