• Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by a1Jim posted 604 days ago 1927 views 0 times favorited 49 replies Add to Favorites Watch
View a1Jim's profile


111999 posts in 2161 days

604 days ago

Topic tags/keywords: resource

Do you need a little larger jointer this little toy might do the job a 12” for only $500. In another add he has a 8” jointer for only $300.

Here’s the 8”

Happy Trails to You

-- Custom furniture

49 replies so far

View pintodeluxe's profile


3202 posts in 1397 days

#1 posted 604 days ago

I don’t need one that big!

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View grandpasworkshop's profile


344 posts in 2363 days

#2 posted 604 days ago

Need a larger shop to house it

-- Grandpaj

View HorizontalMike's profile


6906 posts in 1498 days

#3 posted 604 days ago

I’m just a rookie, so my 8” jointer is plenty big enough for me! Speaking from a lack of knowledge on this, just when or what size should have a power feeder? I am imagining the effort it takes to use a 12” or larger jointer…

-- HorizontalMike -- "Woodpeckers understand..."

View hoosier0311's profile


355 posts in 609 days

#4 posted 604 days ago

Thats quite a machine! does a guy need a V8 Chevy motor to run that?

-- I'm only deaf in one ear,,,,,I just can't hear out of the other one., Denny, Indiana implant, living in PA

View a1Jim's profile


111999 posts in 2161 days

#5 posted 604 days ago

Hey Mike
Yea an advanced rookie for sure .I’m still working up on rookie. I have a 12” jointer and as long as I keep the table clean and waxed it’s not hard to use. I would imagine a large production shop that does a lot of face jointing might want a power feeder.

Maybe a model “A” engine :))

-- Custom furniture

View Cosmicsniper's profile


2199 posts in 1742 days

#6 posted 604 days ago

Dude…put a mattress on it and take a nap. Raise the tables, of course!

-- jay,

View hoosier0311's profile


355 posts in 609 days

#7 posted 604 days ago

Funny, when I was a kid in Southern Indiana we had an old Oliver tractor. One had to put a charcoal grill under the oil pan in the winter to get it fired up. Once running it would run on kerosene, deisel fuel, waste oil, or whatever one could find. Wonder if this is the same Oliver that made that jointer?

-- I'm only deaf in one ear,,,,,I just can't hear out of the other one., Denny, Indiana implant, living in PA

View Joe Lyddon's profile

Joe Lyddon

7595 posts in 2636 days

#8 posted 604 days ago

How would you budge it… let alone move it… plus getting it on / off a truck!

It would cost more to just MOVE it!!

Plus, I think it’s a tad too long for my garage… LOL

That is one awesome jointer!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View Jim Jakosh's profile

Jim Jakosh

10951 posts in 1689 days

#9 posted 604 days ago

It would be nice , but it would displace 3 of my current tools!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Tennessee's profile


1447 posts in 1098 days

#10 posted 604 days ago

Is that a footprint of a paint brush and quart paint can that laid on it so long everything else around it rusted?

-- Paul, Tennessee,

View texas's profile


11 posts in 605 days

#11 posted 604 days ago

Ha! That’s what it looks like.

View MarkTheFiddler's profile


1717 posts in 772 days

#12 posted 604 days ago

You guys reminded me. In my dad’s old furniture shop, the new guy in the carpentry area would get jointer duty. They start their first day with a scrawny or chunky physique. After a 6 months, they were chiseled from stone.

I remember those days. No one wore dust masks, there wasn’t a dust collector, no one wore eye protection, and we’d have a finger altering accident every year.

That Jointer reminds me of those days except there isn’t a 2 foot tall pile of shavings in back of it.

-- Thanks for all the lessons!

View Gary's profile


6862 posts in 2017 days

#13 posted 604 days ago

Can you imagine the noise that thing would produce?

-- Gary, DeKalb Texas only 4 miles from the mill

View Handtooler's profile


1052 posts in 716 days

#14 posted 604 days ago

LJers, Does this one feed left to right? The fence and pork chop seem to make it so; cause my little 6” Craftsman feeds right to left w/fence on back and pork chop reversed to this picture. I’d just like to upgrade to an 8” single phase w/an adjustable outfeed and spiral helex rooler.

-- Russell Pitner Hixson, TN 37343

View Dusty56's profile


11638 posts in 2272 days

#15 posted 604 days ago

At this time , Both of the links lead to the 12” Jim.

-- I'm absolutely positive that I couldn't be more uncertain!

showing 1 through 15 of 49 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase