LumberJocks

jet-lock drawing/photos

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by RCT posted 10-12-2012 01:36 PM 1808 views 0 times favorited 5 replies Add to Favorites Watch
View RCT's profile

RCT

89 posts in 3216 days


10-12-2012 01:36 PM

Topic tags/keywords: question tablesaw refurbishing traditional

Help
I disassemble the jet-lock fence and the drawing I have does not match the parts that were in it. Anyone have a drawing/schematic or better yet a photo of how these parts go into this housing? The drawing I have has been simplified down to where the projection lines showing where parts slip into their slots have been removed. When I install the parts as shown they do not fit. the drawing also does not show any of the spacers that came out of the housing. Any help would be greatly appreciated.

-- "Ya but what does he know anyhow?"


5 replies so far

View oldnovice's profile

oldnovice

5730 posts in 2833 days


#1 posted 10-12-2012 05:04 PM

I Google Jet-lock fence and found this
Jet lock drawing

But I don’t think there is enough detail!

-- "I never met a board I didn't like!"

View toolie's profile

toolie

2024 posts in 2094 days


#2 posted 10-12-2012 06:07 PM

jet lock as in this (round guide rails):

or a t-square fence like one of these (square guide rail):

-- there's a solution to every problem.......you just have to be willing to find it.

View RCT's profile

RCT

89 posts in 3216 days


#3 posted 10-13-2012 02:21 AM

toolie
the round guide rails like your top pic any chance you could take one from under the clamping parts?
thanks

-- "Ya but what does he know anyhow?"

View Boatman53's profile

Boatman53

1000 posts in 1662 days


#4 posted 10-13-2012 02:49 AM

I could take a photo for you if necessary. A also have two I would not mind selling if you really can’t get it back together. They are the older round style bar.

-- Jim, Long Island, NY Ancorayachtservice.com home of the chain leg vise

View toolie's profile

toolie

2024 posts in 2094 days


#5 posted 10-13-2012 01:39 PM

check this out:

http://d3cmirsdb60x3h.cloudfront.net/schematics/delta/34-771.big.pdf

the guts of the fence are the same for several versions. the only thing that changes is the material of the fence. mine is the aluminum fence. the pdf can be blown up with good resolution.

also, these guys know that fence intimately and are very helpful:

http://www.sawcenter.com/

if you own a unisaw, they are an invaluable source of information and parts.

-- there's a solution to every problem.......you just have to be willing to find it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com