Lager table for HF BS

« back to Power Tools, Hardware and Accessories forum

RussellAP

home | projects | blog

2394 posts in 457 days

244 days ago

Can anyone tell me if there is a larger table for the central machine 14 inch band saw?

I tried to cut something large the other day and found that I really need a lager table than 14 inches.

-- Failure does not stop me, it makes me try harder..... because I'm crazy.

4 replies so far

Wildwood home \| projects \| blog 349 posts in 305 days #1 posted 244 days ago	Think you could search a long time trying finding something bigger that will fit your bandsaw. Check this article: Of course have to modify plan to fit your bandsaw. http://www.woodcraft.com/Articles/Articles.aspx?articleid=347 Be sure to read all reviews on Rockler table before deciding. http://www.rockler.com/product.cfm?page=10164 -- Bill
dhazelton home \| projects \| blog 832 posts in 467 days #2 posted 244 days ago	I thought Rockler had a bandsaw table for Deltas and the like – should fit a clone. But if you don’t need a fence and miter slot and just need a larger flat surface for freehand work I’d just fab something up out of MDF or laminate.
Cosmicsniper home \| projects \| blog 2148 posts in 1329 days #3 posted 244 days ago	Darn it! Your title had me all excited. We all need a good place to knock back a cold one! -- jay, www.allaboutastro.com
Alexandre home \| projects \| blog 1417 posts in 362 days #4 posted 244 days ago	Well, I’m busy building one… I’ll post it when its done :P -- My terrible signature...

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8794
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	224
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	82
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1534
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3553
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15801
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2038
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2842
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	903
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6162

	Author	Latest activity		New comments or replies since you last checked
Recycling the wood from a Lazy-boy, is it worth the effort?	joein10asee	2 minutes ago	by Sandra	sign in to get readership tracking
Dead blow mallet	Mark Gipson	3 minutes ago	by woodzy	sign in to get readership tracking
VIKING SMS aka 'BUDSTIKKE'	stefang	3 minutes ago	by Jamie Speirs	sign in to get readership tracking
As The Lathe Turns #33: Promises And Challenges	William	3 minutes ago	by Sandra	sign in to get readership tracking
jennyfernandes's Profile	jennyfernandes	3 minutes ago	by jennyfernandes	sign in to get readership tracking
TABLAS DE CORTES :-) #2: PARA CORTAR MADERAS MÁS LARGAS ;-)	KOVA	5 minutes ago	by Francisco Luna	sign in to get readership tracking
Time lapse Woodworking #17: Walnut Bubinga Vacuum Bag oh my (-:	Canadian Woodworks	9 minutes ago	by camps764	sign in to get readership tracking
Low angle miter with spline, strong enough?	kaloosick	10 minutes ago	by ChrisK	sign in to get readership tracking
Roundover Bit Set for beads?	snowdog	10 minutes ago		sign in to get readership tracking
Alfie Lewis's Profile	Alfie Lewis	10 minutes ago		sign in to get readership tracking

Lager table for HF BS

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...