delta table saw dimensions - HELP!

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by rebelson posted 09-10-2012 12:29 AM 977 views 0 times favorited 3 replies Add to Favorites Watch
View rebelson's profile


26 posts in 2296 days

09-10-2012 12:29 AM

Topic tags/keywords: tablesaw

Hi all, typing this from my phone so please excuse any grammatical errors. Im picking up a used delta cabinet saw tomorrow morning. I am going to use my chevy trailblazer suv to transport it back home. I plan on takingthe the cast iron wings off and just tilting the saw into the back and pushing it in. A friend of course is coming along to help with the move. Can anybody please give me the height, length and width of the saw with the wings removed? Its a cabinet saw and its roughly 15 years old. I don’t know the model number unfortunately. Also, if you have any tips and tricks to making the move to easier im all ears. Thanks in advance!


3 replies so far

View crashn's profile


528 posts in 2586 days

#1 posted 09-10-2012 01:25 AM

rent a small trainer? I did today to pickup cabinets for next weeks kitchen remodel. It was low to the ground and only 40 bucks. plus it was an enclosed trailer, because of the threat of rain. It did not rain, but it was cheap insurance on 4000 bucks worth of cabinets.

-- Crashn - the only thing I make more of than sawdust is mistakes

View knotscott's profile


8122 posts in 3496 days

#2 posted 09-10-2012 02:23 AM

The main table should be 20” wide x 27” deep w/o wings. The base will be roughly 34” tall. Figure some space for hand wheels and the motor poking out a little.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Fred Hargis's profile

Fred Hargis

5072 posts in 2614 days

#3 posted 09-10-2012 11:01 AM

It isn’t going to slide all that easily, plan on something to help, maybe some 2×4 rails or some kind of skid plate.

-- Our village hasn't lost it's idiot, he was elected to congress.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics