CMT 8" Dado Set (230.024.08)

« back to Woodworking Tools, Hardware and Accessories forum

Forum topic by RWR

posted 489 days ago

165 views

0 times favorited

2 replies

RWR home | projects | blog 41 posts in 499 days 489 days ago	I am fixing to pull the trigger on purchasing a new high grade dado set for my Unisaw and have almost settled on the CMT. But, since you guy’s are such a resource, I thought I would ask your opinions before I purchase one. I have no experience with any other set, other than my old antique Craftsman set. Your input, as always, is appreciated. -- Wayne
GaryK home | projects | blog 9537 posts in 886 days 489 days ago	CMT are made in Italy. Their router bits are pretty good, but I don’t know of anyone who has bought their dado set. If you get it make sure to post a review after you have used them for a while. -- Gary, East TX -- The longest journey begins with a single step.
Nicky home | projects | blog 82 posts in 990 days 489 days ago	As the owner of a CMT 8” 24 tooth dado set I’m very happy. Used mostly for dado’s in plywood and mdf. The set I purchased came with a good assortment of shims. Dado’s are clean (little to no splinters) and have flat bottoms. I don’t have anything that I can comapre it to, I can just say that I’m a happy camper with mine. -- Nicky
You must be signed in to reply.

• 
•