two quick questions.

...I try to center them in the door with the largest plain area showing and I cut them 1/8” under size.

-- http://www.woodsongsfurniture.com

No one but you will pay any attention to the location of the beads, nor will they be impressed by your effort to keep them all similarly located once you point it out to them. Cut for highest yield from your raw stock. With regard to rattle room, plywood does not require you to make allowances for wood movement normal in solid stock. If you examine your ply sandwich, you will see that the long grain direction is alternated on each layer basically eliminating any opportunity for movement in the sheet.

Ed

-- Come on in, the beer is cold and the wood is dry. www.crookedlittletree.com

Hi Ed,

Thanks for the feedback. That makes my job simpler and less expensive.

I like the looks of your projects. Continued success with the business.

Have a great day,

-- Bob Lance, DE

The door frame will expand and contract, so you might want to undercut just a bit and it will help with assembly. Ed is right about the panel layout. No one but you will know.

-- http://www.woodsongsfurniture.com

Got ya. Thanks for the followup. I will take your suggestion.

Have a great day,

-- Bob Lance, DE