LumberJocks

Supermax 25x2

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by robjeffking posted 08-20-2012 07:33 AM 1313 views 0 times favorited 2 replies Add to Favorites Watch
View robjeffking's profile

robjeffking

26 posts in 1571 days


08-20-2012 07:33 AM

Hello all I recently aquried a supermax 25×2 and noticed in two post here their are members with the same sander and wanted to ask a question. When I got back home I disected the plug and it was wired 2 hots and a ground so
I changed the plug to match my receptacle and wired the same way. I have noticed the 5 HP lesson motor does get hot after about 30 minutes of continuous use you can lay your hand on it and remove it about 2 secs later with no burns or red marks to my hand. Do the motors typically run this hot? I have been running my machine for an hour at a time then rest it.


2 replies so far

View Gshepherd's profile

Gshepherd

1727 posts in 1666 days


#1 posted 09-02-2012 02:29 AM

I have a 37×2 Supermax and it does not run that hot. 220v 30a single phase. Best get that checked out….. If you run into needing parts I know that they still carry many of them and look into the rubber conveyor belt option.

-- What we do in life will Echo through Eternity........

View robjeffking's profile

robjeffking

26 posts in 1571 days


#2 posted 09-02-2012 03:10 AM

I’ve talked to lesson and performax and they said don’t worry about it thermal reset switch will trip if it gets too hot.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com