Help

Help

51 posts in 1703 days

08-04-2012 10:44 PM

I am finishing up a router table made of birch and pine. I have never finished anything with BLO so here”s the question. Do only havre to apply one coat of BLO? Also I plan on using mini wax finishing paste good idea or not?

1 reply so far

Gerald Thompson

home | projects | blog

798 posts in 1627 days

#1 posted 08-04-2012 11:18 PM

BLO does not really finish anything. It is a poor protectant and is used more to “pop” the grain in wood before covering with a seal coat then the finish.
Is your routher table top birch plywood and the rest pine? Some pictures would help

-- Jerry

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	11151
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	1465
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	318
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	267
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1022
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	3908
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	5796
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	24528
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	129
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	4556
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1178
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	5368
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1232
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	1819
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1110
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4240
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2070
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8271

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Milling/Drying Cherry Logs	SkiTique	09-26-2016 05:59 PM	by pintodeluxe	sign in to get readership tracking
Tsek Meyt - Chess set	Benji Reyes	09-26-2016 05:58 PM	by thecarpentershands	sign in to get readership tracking
Quick Tip #7: Work Holding Part 1	Kent Shepherd	09-26-2016 05:58 PM	by mikethetermite	sign in to get readership tracking
Making a zero clearance insert for miter saw	simonGee	09-26-2016 05:57 PM	by Jim Jakosh	sign in to get readership tracking
Band Saw or Table Saw for 4hp motor?	SusanS	09-26-2016 05:55 PM	by Rentvent	sign in to get readership tracking
Question about miter saw motor repair	kenthepainter	09-26-2016 05:54 PM	by splintergroup	sign in to get readership tracking
Completed project	Monte Pittman	09-26-2016 05:53 PM	by CFrye	sign in to get readership tracking
valentinadn7's Profile	valentinadn7	09-26-2016 05:41 PM		sign in to get readership tracking
General Purpose Assembly Table	Don K	09-26-2016 05:40 PM	by Derfss2003	sign in to get readership tracking
Advice needed on setting up new home woodworking shop	Midirons	09-26-2016 05:37 PM	by ajshobby	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Milling/Drying Cherry Logs

SkiTique

09-26-2016 05:59 PM

by pintodeluxe

to get readership tracking

Tsek Meyt - Chess set

Benji Reyes

09-26-2016 05:58 PM

by thecarpentershands

to get readership tracking

Quick Tip #7: Work Holding Part 1

Kent Shepherd

09-26-2016 05:58 PM

by mikethetermite

to get readership tracking

Making a zero clearance insert for miter saw

simonGee

09-26-2016 05:57 PM

by Jim Jakosh

to get readership tracking

Band Saw or Table Saw for 4hp motor?

SusanS

09-26-2016 05:55 PM

by Rentvent

to get readership tracking

Question about miter saw motor repair

kenthepainter

09-26-2016 05:54 PM

by splintergroup

to get readership tracking

Completed project

Monte Pittman

09-26-2016 05:53 PM

by CFrye

to get readership tracking

valentinadn7's Profile

valentinadn7

09-26-2016 05:41 PM

to get readership tracking

General Purpose Assembly Table

Don K

09-26-2016 05:40 PM

by Derfss2003

to get readership tracking

Advice needed on setting up new home woodworking shop

Midirons

09-26-2016 05:37 PM

by ajshobby

to get readership tracking

1 reply so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...