LumberJocks

Different Circle Jig

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Greg, B. posted 07-30-2012 03:57 PM 1378 views 0 times favorited 2 replies Add to Favorites Watch
View Greg, B.'s profile

Greg, B.

54 posts in 955 days


07-30-2012 03:57 PM

I made a different circle jig and it works really well. The center to center distance on the rods for the craftsman router that I have is 4”.106. I used 8mm rods. The base is oak. With the different hole placement you only have to have one set of rods for the many sizes you can do. 2” to 15” circle can be done. I used t-nuts to hold down the aluminum bar to the board. I will use a 5/16 bolt that I have tapered on the end for placement for bigger holes. The rods are for fine adjustment of circle size.

Greg


2 replies so far

View Jim Finn's profile (online now)

Jim Finn

1676 posts in 1574 days


#1 posted 08-04-2012 07:47 PM

nice jig. How do you measure to 1/1000 ” ?

-- In God We Trust

View lew's profile

lew

10027 posts in 2407 days


#2 posted 08-04-2012 07:51 PM

Cool!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase