Rockwell 34-348

« back to Power Tools, Hardware and Accessories forum

48 posts in 1027 days

303 days ago

I just got this saw and looking for some help as to the proper upgrades. It runs very smooth but I would like to upgrade the fence any suggestions?

4 replies so far

Bryan home \| projects \| blog 48 posts in 1027 days #1 posted 303 days ago	Perhaps I have thought about just adding a subfence to the exising fence what do you guys think
PurpLev home \| projects \| blog 7753 posts in 1818 days #2 posted 303 days ago	congrats. what is the reason you want to upgrade the fence? if it moves smoothly and locks square, it should be good. -- ㊍ When in doubt - There is no doubt - Go the safer route.
Bryan home \| projects \| blog 48 posts in 1027 days #3 posted 303 days ago	Thinking about just reinforceing it with the sub fence I guess so I can clamp stuff to it
BlankMan home \| projects \| blog 1487 posts in 1522 days #4 posted 303 days ago	So if you’re looking of a fence, I have this 52” Shop Fox (Biesemeyer copy) laying around that I’d part with. Shipping cost has always been an issue because it is heavy. -- -Curt, Milwaukee, WI

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8793
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3550
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15784
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2036
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2841
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	902
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6159

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
board & batten over 2x4 frame - stability question	Charlie	5 seconds ago	by IrreverentJack	sign in to get readership tracking
My 2013 Idea for the Shows	ellen35	9 seconds ago	by patron	sign in to get readership tracking
Mud Room Hat and Coat Racks with Bench	C_PLUS_Woodworker	1 minute ago	by Fishinbo	sign in to get readership tracking
Work bench smack down	Newage Neanderthal	4 minutes ago	by Smitty_Cabinetshop	sign in to get readership tracking
Lumber identification	Marcus	5 minutes ago	by Wolfdaddy	sign in to get readership tracking
Greek Paddles	exterminate	6 minutes ago	by Fishinbo	sign in to get readership tracking
Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp	SPalm	6 minutes ago	by Jim Jakosh	sign in to get readership tracking
Bandsaw belt jumps	flwoodie	7 minutes ago	by Grumpymike	sign in to get readership tracking
Help me, I can't stop...	caocian	7 minutes ago	by Buckethead	sign in to get readership tracking
Delta Unifence rip fence	amagineer	7 minutes ago	by Paul Stoops	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

board & batten over 2x4 frame - stability question

Charlie

5 seconds ago

by IrreverentJack

to get readership tracking

My 2013 Idea for the Shows

ellen35

9 seconds ago

by patron

to get readership tracking

Mud Room Hat and Coat Racks with Bench

C_PLUS_Woodworker

1 minute ago

by Fishinbo

to get readership tracking

Work bench smack down

Newage Neanderthal

4 minutes ago

by Smitty_Cabinetshop

to get readership tracking

Lumber identification

Marcus

5 minutes ago

by Wolfdaddy

to get readership tracking

Greek Paddles

exterminate

6 minutes ago

by Fishinbo

to get readership tracking

Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp

SPalm

6 minutes ago

by Jim Jakosh

to get readership tracking

Bandsaw belt jumps

flwoodie

7 minutes ago

by Grumpymike

to get readership tracking

Help me, I can't stop...

caocian

7 minutes ago

by Buckethead

to get readership tracking

Delta Unifence rip fence

amagineer

7 minutes ago

by Paul Stoops

to get readership tracking

Rockwell 34-348

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...