LumberJocks

Signing your projects

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by nate22 posted 07-03-2012 04:28 AM 1281 views 1 time favorited 18 replies Add to Favorites Watch
View nate22's profile

nate22

424 posts in 1531 days


07-03-2012 04:28 AM

I have been making furniture for four years now. I know I should of done this right from the start but I haven’t been signing my name on my projects. What are some of the ways of signing my work. I know you can do it by burning it into the wood but what are some other ways.

-- K & N Furniture Middlebury, In.


18 replies so far

View Bobmedic's profile

Bobmedic

302 posts in 1457 days


#1 posted 07-03-2012 04:48 AM

I sign mine in a hidden place with a sharpie and then finish it so the topcoat seals in the writing.

-- Save lives, ease suffering, reduce morbidity and mortality, stomp out pestilence and disease, postpone the inevitable, and fake compassion. The Paramedics Creed

View lunn's profile

lunn

206 posts in 964 days


#2 posted 07-03-2012 11:49 AM

a friend of mine prints a decal on his puter for me. He can print any size . I finish a spot and apply, then seal over it.

-- What started as a hobbie is now a full time JOB!

View Howie's profile

Howie

2656 posts in 1578 days


#3 posted 07-03-2012 11:58 AM

Branding iron, then a sharpie all in a inconspicuos place.

-- Life is good.

View chrisstef's profile

chrisstef

10846 posts in 1662 days


#4 posted 07-03-2012 12:32 PM

Ive gone one step further and have named most of my projects .. so far theres been the “ferry table” (wood came from a demolished houwse on ferry street, “Milk, 2 sugars” a coffee table for my dad (thats how he likes his coffee), “The Timberskin” ( a fantasy football trophy), etc … I typically burn it into the piece with a wood burning pen.

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View Puzzleman's profile

Puzzleman

333 posts in 1599 days


#5 posted 07-03-2012 01:05 PM

I had a rubber stamp made up with company name, phone number, website, slogan and mention my guarantee.
I stamp it on the bottom of my stools and on the back of the puzzles. I make sure that people know it is there so they can call me again for another item or if their friend likes it, they can show them where to order from. also if the item needs to be repaired or fixed due to inflicted damage, they know how to get in tough with me.

I want my customers to know where it is and to be able to find me again. Repeat sales are the easiest sales to make.

I do not like stickers because they tend to fall off after several years.

I would suggest that wherever you put your information, make it easy for them to find and let them know where it is. Tell them that if they need it ever to be repaired, refinished or whatever, here is my information on your product.

That rubber stamp is my best and cheapest salesman.

-- Jim Beachler, Chief Puzzler, http://www.hollowwoodworks.com

View Woodendeavor's profile

Woodendeavor

216 posts in 1262 days


#6 posted 07-03-2012 01:20 PM

I use a rubber stamp to put my logo on the piece then my trusty Bosch Colt with an engraving bit I cut my logo. Gives a bit of a hand signed feel in my opinion. On my smaller pieces I have a R-Buster stamp from Columbia Marking Tools that I stamp my logo into the piece. It is a personal decision with endless options, Good Luck

View Durnik150's profile

Durnik150

647 posts in 1977 days


#7 posted 07-03-2012 02:40 PM

I use a brand but that doesn’t address the type of wood or date. If I need to do that I use a sharpie next to the brand.

-- Behind the Bark is a lot of Heartwood----Charles, Centennial, CO

View TrBlu's profile

TrBlu

360 posts in 1281 days


#8 posted 07-03-2012 04:27 PM

I have a small branding tip. with my initials, for a soldering pencil. I embed a current year penny with the date showing, then brand my initials under the penny.

-- The more I work with wood the more I recognize only God can make something as beautiful as a tree. I hope my humble attempts at this craft do justice by His masterpiece. -- Tim

View knotscott's profile

knotscott

5460 posts in 2031 days


#9 posted 07-03-2012 04:36 PM

I also put a penny from the year the piece was made in an inconspicuous spot, then use a rubber stamp and ink with my name on it prior to the finish coat….it looks a lot like a branding mark but costs < $10.

My stamp looks alot like this:

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View adaughhetee's profile

adaughhetee

103 posts in 1339 days


#10 posted 07-03-2012 10:33 PM

I print out what I want on my laser printer in reverse then iron it on. http://lumberjocks.com/projects/55626 here is a video by a fellow LJ on the process. I’ve found darker colors do better and the smoother the surface the better.

View Mark's profile

Mark

1787 posts in 1929 days


#11 posted 07-03-2012 10:45 PM

i either engrave it or burn it then i put a penny made in the same year on it so that if it ever becomes an antique, theres an old penny to go with it. and its a golden time to doing it this year because canada is discontinuing their pennies. I dont know about the u.s. An antique with the last of the pennies is a great value.

-- My purpose in life: Making sawdust

View chrisstef's profile

chrisstef

10846 posts in 1662 days


#12 posted 07-03-2012 11:18 PM

I like the penny idea Mark … clever.

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View Alexandre's profile

Alexandre

1417 posts in 846 days


#13 posted 07-03-2012 11:28 PM

Engrave with a dremel

-- My terrible signature...

View Mark's profile

Mark

1787 posts in 1929 days


#14 posted 07-04-2012 07:14 PM

thx chrisstef…i got that idea maybe 2 years ago… p.s this is my 1700th post :P thx chrisstef

-- My purpose in life: Making sawdust

View Jim Jakosh's profile

Jim Jakosh

11473 posts in 1761 days


#15 posted 07-05-2012 04:29 AM

Nate, I have a branding Iron that says “Made in USA by Jim Jakosh”
I use that on the bottom or back of big things where it will not be overwhelming. I also sign my name and the year with a fine point Sharpie and often note the wood species on everything- including the branded items!

.............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

showing 1 through 15 of 18 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase