LumberJocks

At Woodcraft - buy a porter-cable 690L router and get a free 4210 dovetail jig

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by David posted 06-19-2012 08:18 PM 1818 views 0 times favorited 4 replies Add to Favorites Watch
View David's profile

David

110 posts in 2809 days


06-19-2012 08:18 PM

Topic tags/keywords: router dovetail jig woodcraft free

Router is $159. Get a free dovetail jig which costs $125 on woodcraft. Then i entered code 62012 at check-out and got another $10 off (which covers the cost of shipping).

My thoughts – you can never have too many Routers and the dovetail jig is probably a good tool to have for the shop (it got good reviews too).

Here is the link:

http://www.woodcraft.com/product/2005779/33279/portercable-134-hp-router-model-690lr.aspx?refcode=12IN06NL&srct=1526963&utm_source=directemail&utm_medium=email&utm_content=6_19_12&utm_campaign=12IN06NL

Regards,
David

-- dcutter


4 replies so far

View Bill White's profile

Bill White

4450 posts in 3422 days


#1 posted 06-19-2012 09:14 PM

I have the 4210. It is a good jig, and you can add the extra features for thru DTs, box joints, etc.
My first DTs with the jig were within a 1/64”. Additional setup got ‘em dead nuts tight.
I sure as he!! didn’t get free as you did. (Note to self: Dang it!!!!)
Bill

-- bill@magraphics.us

View woodchucker29's profile

woodchucker29

6 posts in 1694 days


#2 posted 06-20-2012 01:47 PM

View helluvawreck's profile

helluvawreck

23150 posts in 2329 days


#3 posted 06-20-2012 03:48 PM

I’ll take a look. Thanks for the tip.

helluvawreck
https://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Bob's profile

Bob

19 posts in 1729 days


#4 posted 06-21-2012 11:38 PM

I saw this offer as well. I have had a PC 4210 for a couple of years so I was surprised to see it listed as “new”. After a little digging, I discovered there is a version 1 and a version 2. I assume version 2 is an improved version that addresses shortcomings in version 1 but I can’t seem to find any documentation that discusses the difference between the versions. Does anyone know?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com