Grizzly G0715P - Setup Question/Flatness

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by broconne posted 05-08-2012 12:24 PM 899 views 0 times favorited 1 reply Add to Favorites Watch
View broconne's profile


1 post in 2204 days

05-08-2012 12:24 PM

Topic tags/keywords: question

Hi – I just received my first real saw, granted its a hybrid and not a true cabinet saw, but it is a step up from my $95 delta contractor. I am in the middle of setting the saw up and I am not sure if what I am seeing is intentional or a defect.

Essentially, on the main part of the table, the area between the miter tracks is lower than the area outside the mitre tracks. That is, if I take a straight edge and hold it across the saw I can see light under the straight edge in the section of the saw that has the blade.

Each individual section is flat, the wings are flat, each side outside the mitre track is flat and the area between mitre tracks is flat. However, the area in between the mitre tracks is lower than the rest of the table.

1 reply so far

View FreshSawDust's profile


68 posts in 2324 days

#1 posted 05-08-2012 01:44 PM

Welcome to Lumberjocks. Congrats the 715 is a very capable saw, I like mine a lot. How much of a dip are you looking at? If it is only a couple thou off it wont hurt anything. You might want to post a pic with the straight edge.

-- TJ - Perryville, Missouri

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics