Veneer Headache

  • Advertise with us

« back to Finishing forum

Forum topic by Edward Pickney posted 04-15-2012 03:07 PM 1027 views 0 times favorited 2 replies Add to Favorites Watch
View Edward Pickney's profile

Edward Pickney

55 posts in 2504 days

04-15-2012 03:07 PM

This project seems to grow and grow. I thought the doors would be the biggest part however, all the paneling needs replaced, the crown molding, widow casing and base not to menton the veneer. The problem I’m trying to figure out is how to finish the veneer before I bring it into the house. All the cabinet face frames and other misc pieces of veneer need to be sprayed outside because of the dangerous fumes present. I’m through with the 33 raised panel doors and I’ve decided what type of finish to use. I have also decided to finish everything on the outside of the shop in the shade. But the veneer seems to complicate the project. I bought two 4×8 sheets of self stick from Herzog. Can I unroll this veneer spray it, let it dry then take it back into the shop to cut it? I’ll be using acrylic lacquer (Sherwin Williams). Thanks in advance for any suggestions.

-- Ed-

2 replies so far

View Bill White's profile

Bill White

4928 posts in 3954 days

#1 posted 04-15-2012 03:32 PM

Short answer: I wouldn’t.


View Edward Pickney's profile

Edward Pickney

55 posts in 2504 days

#2 posted 04-16-2012 10:47 AM

Thanks Bill!

-- Ed-

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics