For Trade: HF Coupon

« back to Woodworking Trade & Swap forum

3284 posts in 1275 days

04-07-2012 10:09 PM

OK, here ya go.

I’ll trade my 25% off any single item at Harbor Freight (good for Easter Sunday only) for more experience in my shop.
I’ll go first and post the coupon. You print and use as you see fit.

Later just send me some experience at your leisure.

or from here:

-- Improvise.... Adapt...... Overcome!

4 replies so far

Roger home \| projects \| blog 15734 posts in 1592 days #1 posted 04-07-2012 10:39 PM	I’ve got the same coupon, but, I’m gonna give ya this little bit o experience I can share with you…..... Here ya go, look closely, and, cheers …..... now doesn’t that Guinness taste good? -- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net
Dallas home \| projects \| blog 3284 posts in 1275 days #2 posted 04-07-2012 10:47 PM	MMMMMMMMMMMM>>>>>>>>>>>TASTY!<<<<<<<<<<<MMMMMMMMMMM -- Improvise.... Adapt...... Overcome!
Greg..the Cajun Wood Artist home \| projects \| blog 5326 posts in 2097 days #3 posted 04-07-2012 10:58 PM	I will trade you my Home Depot $575 gift card for it -- Each step of every Wood Art project I design and build is considered my masterpiece… because I want the finished product to reflect the quality and creativeness of my work
eddie home \| projects \| blog 7602 posts in 1402 days #4 posted 04-08-2012 05:38 AM	wish i had some experience -- Jesus Is Alright with me

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	10150
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	912
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	173
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	186
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	555
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	2909
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	4809
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	20588
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	54
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	3487
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	922
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	4285
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1058
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	1438
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	994
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	3617
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1873
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	7491

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
A Furniture Makers Forum	BigRedKnothead	01-31-2015 05:43 PM	by Dan Krager	sign in to get readership tracking
Built my own hybrid vise for extension table	TheFridge	01-31-2015 05:38 PM	by Don Broussard	sign in to get readership tracking
Work bench smack down	Newage Neanderthal	01-31-2015 05:33 PM	by Dan Krager	sign in to get readership tracking
Rigid R4512 vs Delta 36-725	mifon	01-31-2015 05:32 PM	by TheFridge	sign in to get readership tracking
Lie Nielsen vs older Stanley	johndeereb	01-31-2015 05:30 PM	by ksSlim	sign in to get readership tracking
Vilkman Blanket Chest	CL810	01-31-2015 05:28 PM	by ShaneA	sign in to get readership tracking
dave71053's Profile	dave71053	01-31-2015 05:28 PM	by dave71053	sign in to get readership tracking
Cutting Board Inventory 2015	prospector45	01-31-2015 05:28 PM	by kevinw	sign in to get readership tracking
Animated Wood Lion New Item	Bill Schonfelder	01-31-2015 05:22 PM	by Bill Schonfelder	sign in to get readership tracking
The Stumpy Nubs Workshop- Woodworking infotainment at it's best!	StumpyNubs	01-31-2015 05:22 PM	by mudflap4869	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

A Furniture Makers Forum

BigRedKnothead

01-31-2015 05:43 PM

by Dan Krager

to get readership tracking

Built my own hybrid vise for extension table

TheFridge

01-31-2015 05:38 PM

by Don Broussard

to get readership tracking

Work bench smack down

Newage Neanderthal

01-31-2015 05:33 PM

by Dan Krager

to get readership tracking

Rigid R4512 vs Delta 36-725

mifon

01-31-2015 05:32 PM

by TheFridge

to get readership tracking

Lie Nielsen vs older Stanley

johndeereb

01-31-2015 05:30 PM

by ksSlim

to get readership tracking

Vilkman Blanket Chest

CL810

01-31-2015 05:28 PM

by ShaneA

to get readership tracking

dave71053's Profile

dave71053

01-31-2015 05:28 PM

by dave71053

to get readership tracking

Cutting Board Inventory 2015

prospector45

01-31-2015 05:28 PM

by kevinw

to get readership tracking

Animated Wood Lion New Item

Bill Schonfelder

01-31-2015 05:22 PM

by Bill Schonfelder

to get readership tracking

The Stumpy Nubs Workshop- Woodworking infotainment at it's best!

StumpyNubs

01-31-2015 05:22 PM

by mudflap4869

to get readership tracking

For Trade: HF Coupon

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...