LumberJocks

Tablesaw Dovetail Jig

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by DKV posted 04-04-2012 06:32 PM 1755 views 0 times favorited 3 replies Add to Favorites Watch
View DKV's profile

DKV

3940 posts in 1965 days


04-04-2012 06:32 PM

I built the jig from the August 2010 issue of Woodworkers Journal. Followed the directions to the letter. On my first use I found that it didn’t work right. The jig requires use of both the left and right miter slots. On investigation I found that my miter slots are not equidistant from the blade. The right slot is 1/4” closer to the blade. Is this unique to my DW746 saw?
Thanks,

-- This is a Troll Free zone.


3 replies so far

View Loren's profile (online now)

Loren

8295 posts in 3108 days


#1 posted 04-04-2012 07:15 PM

Put a 1/8” spacer on the arbor. You can get spacers for
dado blades from Lee Valley to fine tune the offset.

View DKV's profile

DKV

3940 posts in 1965 days


#2 posted 04-04-2012 07:22 PM

Loren, thanks for the quick response. I’m embarrassed I didn’t think of that. Problem solved.

-- This is a Troll Free zone.

View Loren's profile (online now)

Loren

8295 posts in 3108 days


#3 posted 04-04-2012 07:25 PM

You’re welcome.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com