Table Saw Sled

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Icer posted 03-31-2012 03:39 AM 2136 views 0 times favorited 6 replies Add to Favorites Watch
View Icer's profile


9 posts in 2437 days

03-31-2012 03:39 AM

Well I went a did it , been checking out all the table saw sleds here and on the net and figured I’d do a test sled to see if I want to make a good one soon .

Well it’s kind of made out of junk stuff I was going to throw out but the thing is very accurate for a test peice , I’m accually pleased with the darn thing . LOL

Now there is another thing om the todo list for the garage . :) figures LOL


6 replies so far

View JediMario's profile


6 posts in 2107 days

#1 posted 04-06-2017 12:53 AM

I getting ready to build my first table saw sled. I am going for Stumpy’s mini sled.

-- My mantra: Stop fixing the blame and fix the problem.

View MrUnix's profile


7005 posts in 2374 days

#2 posted 04-06-2017 12:59 AM

They don’t need to be fancy to be accurate :)

Here is one I made out of stuff scrounged out of a dumpster – and it looks like it:

It may be ugly, but I’ve used the snot out of it for years, and it’s dead nuts accurate.


-- Brad in FL - In Dog I trust... everything else is questionable

View woodbutcherbynight's profile


5598 posts in 2584 days

#3 posted 04-06-2017 04:53 AM

May not be the prettiest girl at the ball, but she will turn a head or two.

-- Live to tell the stories, they sound better that way.

View buckbuster31's profile


254 posts in 691 days

#4 posted 04-06-2017 05:51 PM

this is on my to do list!

View JayCee123's profile


200 posts in 940 days

#5 posted 04-07-2017 12:30 AM

TS sled … one of the most useful shop aides you’ll ever make and use.
Like others already said don’t need to be fancy just need to be dialed in for accuracy. Many methods used to achieve this accuracy are shown on U tube. My favorite is the “4-Cut Method,” sometimes referred to as the “5-Cut Method” ... easy to perform and very accurate.

View gerrym526's profile


274 posts in 3984 days

#6 posted 04-11-2017 04:08 AM

My suggestion is to build at least 3 different sizes of table saw sleds. Mine allow me to cut everything from sides for small wooden boxes to cabinet carcass sides. They’re easy to build, and as shown here, help you use wood scraps you have lying around the shop productively.
Based on what your current projects are, you’ll figure out the dimensions you need for the 3 sizes.

-- Gerry

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics