ISO Delta 12" drill press Jacobs chuck

« back to Woodworking Trade & Swap forum

32 posts in 2088 days

03-19-2012 03:27 AM

Topic tags/keywords: drill press

The chuck on my Delta 12” drill press Model # 11-990 has broken. Searching for a reasonably priced Jacobs chuck, 1/8” -1/2”, JT 33. Anyone have an old cratered press they want to part out or know of an outlet besides “E-Replacement parts”.......those folks are proud of their parts!
Thanks in advance,
take care,
Bill

1 reply so far

tuffruss

home | projects | blog

38 posts in 2133 days

#1 posted 03-19-2012 04:54 AM

I get my chucks from Wholesale tool wttool I think. I have had very good luck with them. You may have to search a little bit because they have expensive as well as low priced imports which will work good for home use. Russ.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	11734
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	1878
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	398
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	312
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1238
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	4536
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6359
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	26730
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	179
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5118
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1333
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	5928
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1316
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2035
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1153
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4587
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2156
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8602

	Author	Latest activity		New comments or replies since you last checked
rekygercula948's Profile	rekygercula948	09-19-2017 12:45 PM		sign in to get readership tracking
Restoration of the ancient iconostasis	ANATOLII MATIASHCHUK	09-19-2017 12:43 PM	by Scott Oldre	sign in to get readership tracking
Looking for help	Ross1219	09-19-2017 12:43 PM	by Ross1219	sign in to get readership tracking
Ebony and Brass-scaled knife	PPK	09-19-2017 12:41 PM	by doubleG469	sign in to get readership tracking
josephauthor4's Profile	josephauthor4	09-19-2017 12:40 PM		sign in to get readership tracking
Another chaotic cutting board	RRBOU	09-19-2017 12:40 PM	by doubleG469	sign in to get readership tracking
Off-topic content. Click to see the post.	chrisstef	09-19-2017 12:39 PM	by chrisstef	sign in to get readership tracking
socrbent's Profile	socrbent	09-19-2017 12:37 PM	by socrbent	sign in to get readership tracking
true04roy's Profile	true04roy	09-19-2017 12:37 PM		sign in to get readership tracking
braunvelasquez61's Profile	braunvelasquez61	09-19-2017 12:36 PM		sign in to get readership tracking

ISO Delta 12" drill press Jacobs chuck

1 reply so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

rekygercula948's Profile

Restoration of the ancient iconostasis

Looking for help

Ebony and Brass-scaled knife

josephauthor4's Profile

Another chaotic cutting board

Off-topic content. Click to see the post.

socrbent's Profile

true04roy's Profile

braunvelasquez61's Profile

ISO Delta 12" drill press Jacobs chuck

1 reply so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...