Anyone out there with a Grizzly G0453P?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Everett1 posted 03-15-2012 12:03 AM 1737 views 0 times favorited 2 replies Add to Favorites Watch
View Everett1's profile


213 posts in 2528 days

03-15-2012 12:03 AM

Hi Folks,

I got a G0435P planer back in December. The power cord on it was so pitifully short, that I went to change it to a much longer one, I’d rather not have to use an extension cord with 240v.

So, when i unhooked the cables from inside the magnetic switch box, one came loose by accident, and I’m not sure where it goes. The diagram in the book is for the non P version, which has the magnetic switch box up top with the start/stop buttons; the P has it seperate. I called Grizzly, and the guy on the phone couldn’t find anything referencing this.

I’m probably being really cautious, as I don’t want to fry it.

If someone has the Polar Bear version of this planer, would you be able to open the magnetic switch box and tell me where the wires from the buttons up top go? the positions are labeled. There are 4 wires:
Blue (I’m set with where this goes)
White (I’m pretty sure that is where it goes, i didn’t touch it)
Black (This is one I need to know where it goes)
Red (This is also one I need to know where it goes)

If you do, make sure to unplug the planer first please.

The help is much much appreciated.



-- Ev in Framingham, MA

2 replies so far

View Everett1's profile


213 posts in 2528 days

#1 posted 03-15-2012 10:09 PM

Hello again folks,

Found the answer. Grizzly also made a G0453Z planer with the separate button box, and that book has the proper diagram I was looking for.



-- Ev in Framingham, MA

View Chipy's profile


374 posts in 2587 days

#2 posted 03-15-2012 10:58 PM

You can buy vary heavy line cord(10 Gage) that will carry the load for 240v.I have 15 feet on my GO 691 3hp 240 volt table saw.It’s not cheep but it gets the job right.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics