Lumber Rack

2044 posts in 1234 days

435 days ago

Well the lumber rack is up and ready to have the wood put on it. {That will take a while}
The Woodsmith shop plans called for 60 degree on the top cleat and 60 drgree for the up rights. After a few comments from the question I put out there. I changed it to 45 on both.

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

6 replies so far

TopamaxSurvivor home \| projects \| blog 13192 posts in 1846 days #1 posted 435 days ago	Looks like it should do the job. -- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence Wake Up America!! Please read; http://www.commondreams.org/view/2009/01/26-0
amagineer home \| projects \| blog 1021 posts in 767 days #2 posted 435 days ago	Tim, it came out great. I will have to make one this spring, I am running out of room in the shop. -Don -- Flaws are only in the eye of the artisan!
sedcokid home \| projects \| blog 2508 posts in 1768 days #3 posted 434 days ago	Great Job!! Thanks for sharing -- Chuck Emery, Michigan,
Roger home \| projects \| blog 9191 posts in 974 days #4 posted 434 days ago	oh yes. this should hold some good lumber -- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net
Eagle1 home \| projects \| blog 2044 posts in 1234 days #5 posted 433 days ago	It wasn’t expensive to build at all. It’s done from a single sheat of 4×8 plywood. About $30.00 here in the small town I live in. -- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened
MrRon home \| projects \| blog 1578 posts in 1413 days #6 posted 433 days ago	I’ve always used 45° for cleats.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8793
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	223
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1534
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3550
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15787
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2036
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2841
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	902
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6159

	Author	Latest activity		New comments or replies since you last checked
Now THIS is a Nice Ash plane!	RaggedKerf	10 minutes ago	by Robb	sign in to get readership tracking
Dust Extraction Arm #1: Getting Started	LokisTyro	15 minutes ago		sign in to get readership tracking
Chevalet Clubhouse.	shipwright	18 minutes ago	by JR45	sign in to get readership tracking
Advice on selecting a Table Saw	RPhillips	21 minutes ago	by RPhillips	sign in to get readership tracking
Transporting a Table Saw	Odiferous	21 minutes ago	by ajosephg	sign in to get readership tracking
HELP hole in wood	Gatorjim	24 minutes ago	by FancyCloth	sign in to get readership tracking
Sticky paint	SteveCherry	25 minutes ago		sign in to get readership tracking
Coffee Table	wiscoworker	25 minutes ago		sign in to get readership tracking
Stepping Out	Nairi Safaryan	28 minutes ago	by peteg	sign in to get readership tracking
DustyWW's Workshop	DustyWW	37 minutes ago	by DustyWW	sign in to get readership tracking

Lumber Rack

6 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...