Spalted Maple Table Tops for Swap or Sale

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by reberly posted 03-11-2012 01:04 AM 2507 views 0 times favorited 8 replies Add to Favorites Watch
View reberly's profile


191 posts in 2858 days

03-11-2012 01:04 AM

Hi all,
Here are the slabs from one of the logs I slabbed. They are 8/4 and 12/4 thick, 31” wide, and about 6’ long. I would love to swap for a maple syrup evaporator, a pottery wheel, or a pottery kiln, but if they are $5/bdft if they must be sold.

-- "Big Timber is our Legacy" ,

8 replies so far

View john49's profile


5 posts in 4024 days

#1 posted 03-20-2012 11:08 AM

Don’t have anything to trade. Great looking slabs. What is the weight of one of them and calculate the price for one of the 8/4 slabs. Thanks JN

-- John

View reberly's profile


191 posts in 2858 days

#2 posted 03-20-2012 02:14 PM

Hi John,
They are under 30 bdft and weigh about 90 lbs kiln dried so they are around $150 each. E-mail me at if you would like me to get a shipping quote.

-- "Big Timber is our Legacy" ,

View Sgt374's profile


36 posts in 2764 days

#3 posted 03-20-2012 05:31 PM

Where are you located?

View reberly's profile


191 posts in 2858 days

#4 posted 03-20-2012 07:00 PM

I am located in Buchanan, Michigan, but I make alot of road trips. Where are you located? I have a trip north to St. Cloud, MN through Chicago, Madison, Dells, and Minneapolis in two weeks and a trip south to Bloomington, IN every few months.

-- "Big Timber is our Legacy" ,

View German_in_Ohio's profile


48 posts in 4300 days

#5 posted 05-09-2012 09:32 PM

Those boards really look good, are they still available? How much would shipping to the Dayton/Ohio area cost?


View rockindavan's profile


299 posts in 2805 days

#6 posted 05-10-2012 02:03 AM

I live in Madison and may be interested. Are they freshly cut, or have they been drying for awhile?

View reberly's profile


191 posts in 2858 days

#7 posted 05-10-2012 03:04 AM

Hi Rockindavan,
I have put them through the kiln once and they will be through again starting later this month. I takes a few cycles to dry thick stock.

-- "Big Timber is our Legacy" ,

View Danpaddles's profile


573 posts in 2481 days

#8 posted 05-10-2012 03:35 AM

Just visited your web page. Nice stuff, in my neck of the woods (Indy).

Do you ever air dry walnut? seems like so much of the color variations go out of Walnut when it is kiln dried. I’m thinking of a project or two I might like to do with some wilder looking walnut, 5/4 or 4/4 boards. I have seen air dried walnut with lots of sap wood, and some purple stains, all mixed in one board. Probably next Fall before I buy the wood.

Also will want some butternut slabs for Windsor chair seats, in Sept. would love not to edge join. So I’d need a hunk about 22 inches wide, 8/4 or a smidge over. Can you help?

-- Dan V. in Indy

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics