Bad News for me, Good News for all of you!!!

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by blackivory69 posted 03-04-2012 08:07 AM 2746 views 1 time favorited 7 replies Add to Favorites Watch
View blackivory69's profile


84 posts in 3159 days

03-04-2012 08:07 AM

Topic tags/keywords: bandsaw biscuit joiner drill press planer chisel miter saw router spray gun blade clamp jointer plane sander tablesaw

Hello to everybody. Bad news for me, I am leaving the world of woodworking for good. So good news for all of you because I am selling thousands worth of tools and machines. I will sell some of my tools and machines locally for now coz I don’t have time to ship and pack them. So for now I want them to be picked up from my house. Here’s the link of the video of my worksop >> I cannot give you the complete list for now coz I’m very busy but here are some highlights. Let’s start with my beloved SawStop:

- SawStop ICS31230 Industrial Cabinet Saw 3-hp 230-Volt Single Phase
- Rikon 18” Bandsaw
- Inca 8” Jointer <<<< I can’t believe I will let this one go :( :( :(
- Vintage Delta Radial Drill Press——I really love this Drill Press :(
- Dewalt Planer DW735
- 60 Gal Husky Air Compressoer (240V Single Phase)
- Milwaukee routers
- 24” Leigh Dovetail and 12” Porter Cable Dovetail Machines
- My Router Table that I made with Triton Router. You can see it here >
- My woodworking woodbench >>
- Makita LS1013 Dual Slide Compound 10-inch Miter Saw
- Festool TS 55 Saw
- Bunch of Parallel Clamps (Bessey, Jet, Jorgensen)
- Planes (Baileys 3,4,5,51/2,7,8)(Bed rock 605) (Veritas Low Angle Smooth Plane)
- LOTs and I mean mean LOTS of hand Tools!!!
- and hundreds B/F of lumber (mostly Hardwoods, soft maple, etc)

I know you are probably asking why am I quitting woodworking. Well I actually have another hobby which is Photography. It was my fashion already long before the woodworking beetle bit me. I was a Professional wedding Photography but I stop due to my regular job schedule. But now I’m going back to the one I really love and I want to dedicate my whole time on it. I still love woodworking, that’s why I’ll probably keep maybe a plane or two. This process will take time because I accumulated hundreds of tools. And I’m also super busy because my wedding is already around the corner. I’ll keep you guys posted before I start or when I start putting these on Craigslist and eBay. For those LOCAL, PM me so I can give you my cell number. Again, thanks to all of you. And I really appreciate the whole experience I had in this lovely world of woodworking. Good luck to all of you.

-- blackivory69

7 replies so far

View bluepaulsky's profile


34 posts in 2619 days

#1 posted 03-04-2012 08:17 AM

good luck with your wedding and on your photography, but i bet u wish you haven’t i used to play drums but gave up taken on other things, so i sold them and you guest it.

-- pgray

View KenBry's profile


484 posts in 2590 days

#2 posted 03-04-2012 04:33 PM

My friend, I wish you where closer to phoenix, az. I would clean you out of several items. I would recommend Craigslist for the big items. Local guys here have had good luck selling off equipment. Mind you it’s normally 50-60 cents on the dollar.

I have been looking for a set of user handplanes at a fair price if you are interested in maybe mailing them, send me your best price.

-- Ken, USAF MSgt, Ret.

View blackivory69's profile


84 posts in 3159 days

#3 posted 03-04-2012 06:40 PM

I just listed the following on Los Angeles Craigslist:

~Delta Planer TP400LS on Craigslist for $100.00. It comes with an extra set of brand new blade. >>

~Work Sharp WS3000. $150.00 >>

~I lowered the price on Freud Edge Bander. $100.00 >>

~Rockler HVLP Spray Sysytem. $50.00 >>

~Brand New 4” Clear Flex Hose. $15.00 >>

~Delta 8” Dado Blade (used, only one shim). $40.00 >>

~ Craftsman Powder Coating System (Non Woodworking Tool). $27.00 >>

~Porter Cable 4210 Dovetail Machine. Comes with Half (4211) and through (4213) Templets. $100.00 >>

~Porter-Cable 4215 Mini Through Templet >>

KenBry: As of now I dont have time to mail or ship anything. But after my wedding I sure can. I have
Stanley Baileys 3, 4, 5, 5c, 5 1/2, 6, 7, 8
Stanley bedrock 605 (but I probably keep this one)
Veritas Low Angle Smoother Plane with A2 blade

-- blackivory69

View blackivory69's profile


84 posts in 3159 days

#4 posted 03-04-2012 10:37 PM

Delta Planer is SOLD!!!!

-- blackivory69

View jussi's profile


105 posts in 3107 days

#5 posted 03-05-2012 01:39 AM

I may be interested in some of the items. I’m local. PM what your asking for the Festool TS55, Veritas low angle smoother, rikon bandsaw, parallel clamps and sawstop.

View hong's profile


15 posts in 2423 days

#6 posted 03-05-2012 05:02 PM

how much for the saw stop

View laxbograt's profile


76 posts in 2569 days

#7 posted 03-08-2012 01:57 PM

Sent pm regarding clamps & # 7 plane

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics