wood for sale Sacramento area doing some spring cleaning

« back to Woodworking Trade & Swap forum

John Ormsby

home | projects | blog

1236 posts in 1906 days

454 days ago

Hello All,

I am doing some early spring cleaning and have some wood for sale.

I lots of:

A) 2 1/2” x2 1/2” x 20” Oak squares $4 each over 100 pcs

B) real mahogany 1/2 round turnings $2.50 to $3.50 each over 200 pcs

C) 2” x 2” x 46” long maple squares $4 each 100 pcs

D) aromatic red cedar 1/2” thick sizes vary 5” to 7” wide up to 32” long $1 per square foot 1,000s of pieces

That’s it for now. This is for local only. I don’t have any way to ship.

Send me an email if interested.

Thanks, John

-- Oldworld, Fair Oaks, Ca

7 replies so far

Napaman home \| projects \| blog 5015 posts in 2246 days #1 posted 454 days ago	John I cant make it… But wanted ALL LJ’s to know—-John is a super good guy and has LOTS OF QUALITY wood…and if you are in the area send him a note… Matt -- Matt--Proud LJ since 2007
jack1 home \| projects \| blog 1806 posts in 2196 days #2 posted 454 days ago	Send me a note with your address so I can get a map. I’ll try to stop by maybe Fri or next week. I’m in Herald, CA so I’m not too far away. Jack -- jack -- ...measure once, curse twice!
robert triplett home \| projects \| blog 1306 posts in 1274 days #3 posted 454 days ago	I always try to see john when I go wood hunting in his area. I have bought some great wood from him and had some nice visits as well. He uses a lot of wood and has quite a bit stockpiled. -- Robert, so much inspiration here, and so little time!
roundguy home \| projects \| blog 60 posts in 854 days #4 posted 451 days ago	Don’t sell my Maple! I need more….
MedicKen home \| projects \| blog 1560 posts in 1631 days #5 posted 448 days ago	John…..Do you have any of the maple left? I got some from you a couple of years ago and would like more. I may be up there in a couple of months and hopefully we can work another deal. Let me know -- My job is to give my kids things to discuss with their therapist....medic20447@gmail.com
John Ormsby home \| projects \| blog 1236 posts in 1906 days #6 posted 448 days ago	roundguy, I have set aside some maple for you. MedicKen, I will most likely still have maple around. How much do you want to get? -- Oldworld, Fair Oaks, Ca
MedicKen home \| projects \| blog 1560 posts in 1631 days #7 posted 448 days ago	John…..probably 100-200bf -- My job is to give my kids things to discuss with their therapist....medic20447@gmail.com

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8793
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3549
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15783
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2841
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	902
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

	Author	Latest activity		New comments or replies since you last checked
I needed a new marking gauge	parkerdude	2 minutes ago	by sgmdwk	sign in to get readership tracking
Does Not Compare To Dewalt	pintodeluxe	2 minutes ago	by pintodeluxe	sign in to get readership tracking
Cutting bread boards from maple and walnut	wlojr	2 minutes ago	by rdwile	sign in to get readership tracking
Off-topic content. Click to see the post.	shipwright	3 minutes ago	by shipwright	sign in to get readership tracking
i need to run a 220 volt outlet for a table saw, how do i put in the outlet?	michaelsgarage	5 minutes ago	by bandit571	sign in to get readership tracking
decision on buying a newer Delta bandsaw	John Ormsby	5 minutes ago	by rustfever	sign in to get readership tracking
Saws, using collecting, cleaning and buying	Don W	7 minutes ago	by Mauricio	sign in to get readership tracking
Rock-n H Woodshop podcast #3: Episode 4	Drew	7 minutes ago	by joein10asee	sign in to get readership tracking
LJ friends and gifts. #8: The postwoman came to my workshop... with a pack from a dear friend.	mafe	8 minutes ago	by Philip	sign in to get readership tracking
A MUST SEE FOR EVERY WOODWORKER	stefang	11 minutes ago	by Sanity	sign in to get readership tracking

wood for sale Sacramento area doing some spring cleaning

7 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

I needed a new marking gauge

Does Not Compare To Dewalt

Cutting bread boards from maple and walnut

Off-topic content. Click to see the post.

i need to run a 220 volt outlet for a table saw, how do i put in the outlet?

decision on buying a newer Delta bandsaw

Saws, using collecting, cleaning and buying

Rock-n H Woodshop podcast #3: Episode 4

LJ friends and gifts. #8: The postwoman came to my workshop... with a pack from a dear friend.

A MUST SEE FOR EVERY WOODWORKER

wood for sale Sacramento area doing some spring cleaning

7 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...