LumberJocks

FOR SALE - RIDGID TS3650 10” Cast Iron Table Saw

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Milo posted 02-17-2012 09:57 PM 8160 views 0 times favorited 6 replies Add to Favorites Watch
View Milo's profile

Milo

869 posts in 2782 days


02-17-2012 09:57 PM

This Saw has two additional features that are not with the standard saw.

A 36” Beismeyer Fence

The arbor has been replaced on this saw, and no longer has the defective arbor with was the subject of a RIDGID recall.

RIDGID TS3650 10” Cast Iron Table Saw
Cat #14633
From the RIDGID Website
Features Powerful 1-1/2 HP TEFC (Totally Enclosed Fan Cooled) Motor™ – keeps dust and debris out of motor for extended life Rugged and precise rip fence design with micro-adjust – 36 in. rip capacity for ripping wider material Cast iron table extensions with clamping surface – allow jigs and featherboards to be clamped in place easily Tool free blade guard* Up front controls – for easier access
Specifications Input: TEFC 1-1/2 HP
13 / 6.5 Amps.
120 V / 240 V Blade Diameter: 10 in. Depth-of-Cut At 45º: 2-1/4 in. Depth-of-Cut At 90º: 3-3/8 in. Rip Capacity: 36 in. right of blade
12 in. left of blade No Load Speeds: 3,450 r/min. Tool Weight: 287 lb.
Includes
Herc-U-Lift™ mobile base, miter gauge, blade guard

I am asking $400 OBO, and I will listen to trade offers.

milo_357@yahoo.com

The attached router table is NOT included. But you can see how easily one can be installed.

I am in the Gatlinburg, TN area, SouthEast of Knoxville. Email me if you are interested. I was able to put this tablesaw in the back of my Subaru Legacy after I removed the fence and outer tabletop pieces. It is not difficult to transport at all.

It goes on eBay March 1st, so let me know if you are interested. I’d much rather it go to a Lumberjock!

-- Beer, Beer, Thank God for Beer. It's my way of keeping my mind fresh and clear...


6 replies so far

View knotscott's profile

knotscott

7210 posts in 2838 days


#1 posted 02-17-2012 11:10 PM

Nice fence….being a lift tilt saw, you could easily rob some of that left side rip capacity and add it to the right….maybe 48” to 50” rip capacity. Just curious, do you still have the original fence?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View HorizontalMike's profile

HorizontalMike

7144 posts in 2376 days


#2 posted 02-17-2012 11:11 PM

And your next purchase/desire IS…?

-- HorizontalMike -- "Woodpeckers understand..."

View Milo's profile

Milo

869 posts in 2782 days


#3 posted 02-18-2012 12:42 AM

Knotscott, yes, I do have the original fence and runners.

Mike, a little space for my 1982 R65 Airhead!

I also have a Delta Uni, and really want to open up some space in my shop to be able to move around. I have too much JUNK, and the Ridgid has to go. I have an OSS still in the box I’d love to break out, plus some other projects. But I have to clear out some space. I’m a packrat, and I’m going to move a lot of stuff out so I can fill new junk in… uhm, I mean be able to find what I am looking for, for once! ;)

-- Beer, Beer, Thank God for Beer. It's my way of keeping my mind fresh and clear...

View Milo's profile

Milo

869 posts in 2782 days


#4 posted 03-23-2012 11:51 PM

Just a small bump.

I listed the saw on eBay if anyone’s interested.

Thanks!

Milo

-- Beer, Beer, Thank God for Beer. It's my way of keeping my mind fresh and clear...

View Doss's profile

Doss

779 posts in 1727 days


#5 posted 03-28-2012 10:11 PM

I’ll be kind of close, but not close enough next month. I’ll be in Nashville for a few days. I just wish warranties transferred between owners.

-- "Well, at least we can still use it as firewood... maybe." - Doss

View Milo's profile

Milo

869 posts in 2782 days


#6 posted 03-29-2012 12:56 AM

Doss,

Sorry amigo, it sold on eBay last week. Buyer is picking it up Saturday.

Can’t wait to get that space BACK! ;)

Milo

-- Beer, Beer, Thank God for Beer. It's my way of keeping my mind fresh and clear...

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com