• Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by quilter posted 02-13-2012 03:39 AM 629 views 0 times favorited 2 replies Add to Favorites Watch
View quilter's profile


3 posts in 1714 days

02-13-2012 03:39 AM

I am attempting to put a saw blade on my Delta Band Saw Model 28-190. I can not seem to get it to work. When I turn the wheel to see if it is tracking okay it comes off the top wheel. Any help anyone can give will be greatly appreciated. I’m sure someone out there has had this problem. Ron

-- Ron

2 replies so far

View MedicKen's profile


1610 posts in 2881 days

#1 posted 02-13-2012 04:02 AM

On the back of the machine there is a tracking adjustment. It is located on the tension assembly and will have a thumb screw and a wing nut. With the blade on, slowly turn the upper wheel and adjust the thumb screw until the blade stays on. Slightly tension the blade and keep turning the wheel. You may need to adjust the tracking more than once. If the blade you are replacing is wider than the previous blade the thrust bearings on the guides may also need to be moved back to allow clearance. After the blade is tracking well and tensioned re-adjust the thrust bearings

-- My job is to give my kids things to discuss with their

View RetiredCoastie's profile


999 posts in 2602 days

#2 posted 02-13-2012 04:13 AM

If your other blades track correctly, the new blade may not have been brazed squarely when the ends were joined together during manufacture. Is it a name brand blade or Chinese junk from harbor freight?

-- Proud Supporter of Homes For Our Troops

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics