LumberJocks

Router Bit

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by DHaden posted 01-14-2012 07:18 AM 817 views 0 times favorited 4 replies Add to Favorites Watch
View DHaden's profile

DHaden

77 posts in 2121 days


01-14-2012 07:18 AM

Topic tags/keywords: router

I just got s new router bit! It has a plastic covering on it and I would like to know the best way to remove it. This is the first one I have bout like this and dont want to ruin the bit or cut myself removing the covering.

-- Measure once, cut twice.


4 replies so far

View Nighthawk's profile

Nighthawk

548 posts in 1819 days


#1 posted 01-14-2012 07:27 AM

Is it a plastic or is more like a hard silcon covering… it is usally just a silcon rubber to protect the bit… and you can just peel them off.

-- Rome wasn't built in a day... but I wasn't on that job? ... http://www.wackywoodworks.co.nz

View felkadelic's profile

felkadelic

212 posts in 2002 days


#2 posted 01-14-2012 07:28 AM

I’ve always just grabbed the plastic covering as far down the shank as possible, and torn it off. The plastic tears really easily/predictably so I don’t see much possibility of injury

View knotscott's profile

knotscott

7210 posts in 2838 days


#3 posted 01-14-2012 01:13 PM

I usually just pull it off, but if it’s stubborn you can always spin it and bury it in a piece of scrap wood.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View DHaden's profile

DHaden

77 posts in 2121 days


#4 posted 01-14-2012 07:29 PM

Pealed right off. Thanks for the help.

-- Measure once, cut twice.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com